Komatsu DUCT 17A-54-45160 DUCT	Unit Body Material:Cast Iron; Basic Load Rating, Static Rating(N):15400; Stroke:No; Diameter series symbol:Used for Light load; Pillow Type, Category:Standard; Surface Treatment:No; Bearing Unit, Type:Pillow Type; Days to Ship:Quote; Fit:J7;
Komatsu DUCT 56C-07-17270 DUCT	Dimension L:6.61 in; e - Geometry Factor:0.23; Grease Lubrication - M/N Seal:2200 rpm; Dimension D:5.25 in; Dimension M:2 in; Dimension KA:1.13 in; C0 - Static Load:31900 lb; Shaft Tolerance:0.0015 in; Dimension P:3.75 in; Housing Style:Take-Up;
Komatsu DUCT 423-07-31753 DUCT	N:11mm; d:17.46 mm; N1:17 mm; T min.:-20 °C; H2:63.7 mm; H:31.8 mm; A:32 mm; H1:12.5 mm; Recommended tightening torque for set screw:3.7 Nm; Designation of housing:PLE204-;
Komatsu DUCT 23B-54-82411 DUCT	D:500.000 mm; e - ISO Factor3:0.3; Reference Thermal Speed Rating (Oil)7:760; Cage Material:Brass; C0 - Static Radial Rating:5120000 N; Bore Taper:1/12; B - Outer Ring Width:160.000 mm; Y1 - ISO Factor5:3.35; Y2 - ISO Factor6:2.2; R - Inner Ring To Clear Radius1:4.000 mm;
Komatsu DUCT 198-911-6451 DUCT	Unit:Metric Series; Inner Ring:Provided; Basic Load Rating Cr (Dynamic)(kN):3.33; Roller Follower Type:Non-Separate; Roller Type:Crowned Type; Roller Lining:None; Volume Discount:Available; Category:Roller Follower; Allowable Rotational Speed(rpm):8000; d:6;
Komatsu DUCT 198-01-62150 DUCT	Unit Body Material:Cast Iron; Basic Load Rating, Static Rating(N):15400; Stroke:No; Diameter series symbol:Used for Light load; Pillow Type, Category:Standard; Surface Treatment:No; Bearing Unit, Type:Pillow Type; Days to Ship:Quote; Fit:J7;
Komatsu DUCT 14X-54-28320 DUCT	Unit Body Material:Cast Iron; Basic Load Rating, Static Rating(N):15400; Stroke:No; Diameter series symbol:Used for Light load; Pillow Type, Category:Standard; Surface Treatment:No; Bearing Unit, Type:Pillow Type; Days to Ship:Quote; Fit:J7;
Komatsu DUCT 198-54-72750 DUCT ASS'Y	N:11mm; d:17.46 mm; N1:17 mm; T min.:-20 °C; H2:63.7 mm; H:31.8 mm; A:32 mm; H1:12.5 mm; Recommended tightening torque for set screw:3.7 Nm; Designation of housing:PLE204-;