Komatsu DUCT 198-03-75380 DUCT	D:500.000 mm; e - ISO Factor3:0.3; Reference Thermal Speed Rating (Oil)7:760; Cage Material:Brass; C0 - Static Radial Rating:5120000 N; Bore Taper:1/12; B - Outer Ring Width:160.000 mm; Y1 - ISO Factor5:3.35; Y2 - ISO Factor6:2.2; R - Inner Ring To Clear Radius1:4.000 mm;
Komatsu DUCT 209-979-6622 DUCT	T min.:-20 °C; B:21.4 mm; L1:25 mm; N:M10; Designation of bearing:ES205G2; Dz:60 mm; H1:15 mm; Designation of open end cover:SCOE205-25; L:75 mm; C0:7.88 kN;
Komatsu DUCT 427-Z90-3750 DUCT	B:53.7 mm; H1:15 mm; J:114 mm; Recommended tightening torque for set screw:22 Nm; T max.:100 °C; C0:32.8 kN; A1:36 mm; Designation of housing:PA212-; E:25 mm; s1:26.85 mm;
Komatsu DUCT 56B-54-3A161 DUCT	Dimension L:6.61 in; e - Geometry Factor:0.23; Grease Lubrication - M/N Seal:2200 rpm; Dimension D:5.25 in; Dimension M:2 in; Dimension KA:1.13 in; C0 - Static Load:31900 lb; Shaft Tolerance:0.0015 in; Dimension P:3.75 in; Housing Style:Take-Up;
Komatsu DUCT 428-Z90-3272 DUCT	Recommended tightening torque for set screw:8 Nm; d:44.45 mm; A:38 mm; A4:26 mm; G:M6x1; Designation of bearing:UC209-28G2T20; Dz:95 mm; C:31.85 kN; Z:57.7 mm; A2:40.2 mm;
Komatsu DUCT 176-01-55350 DUCT	Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Days to Ship:7 Days; Flange O.D. H(φ):52; Flange Shape:Square Type; Bearing Retained:No; Bearing Material:[Steel] Steel; Shape:Flanged Pilot Type;
Komatsu DUCT 421-07-31610 DUCT	Unit:Metric Series; Inner Ring:Provided; Basic Load Rating Cr (Dynamic)(kN):3.33; Roller Follower Type:Non-Separate; Roller Type:Crowned Type; Roller Lining:None; Volume Discount:Available; Category:Roller Follower; Allowable Rotational Speed(rpm):8000; d:6;
Komatsu DUCT 17M-911-5131 DUCT	Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Days to Ship:7 Days; Flange O.D. H(φ):52; Flange Shape:Square Type; Bearing Retained:No; Bearing Material:[Steel] Steel; Shape:Flanged Pilot Type;