Komatsu DUCT 198-Z11-3821 DUCT	T min.:-20 °C; B:21.4 mm; L1:25 mm; N:M10; Designation of bearing:ES205G2; Dz:60 mm; H1:15 mm; Designation of open end cover:SCOE205-25; L:75 mm; C0:7.88 kN;
Komatsu DUCT 154-01-31110 DUCT	N:11mm; d:17.46 mm; N1:17 mm; T min.:-20 °C; H2:63.7 mm; H:31.8 mm; A:32 mm; H1:12.5 mm; Recommended tightening torque for set screw:3.7 Nm; Designation of housing:PLE204-;
Komatsu DUCT 198-54-72921 DUCT ASS'Y	Unit Body Material:Cast Iron; Basic Load Rating, Static Rating(N):15400; Stroke:No; Diameter series symbol:Used for Light load; Pillow Type, Category:Standard; Surface Treatment:No; Bearing Unit, Type:Pillow Type; Days to Ship:Quote; Fit:J7;
Komatsu DUCT 56B-82-31120 DUCT	Width T(mm):15; C Chamfered:Provided; Bearing Part Number:6200; Height Indication:Height Configurable; Days to Ship:8 Days; Bearing Used:Deep Groove Ball Bea; Bearing Retained:Yes (with retaining; Number of Bearings:Single;
Komatsu DUCT 418-07-33820 DUCT	Dimension L:6.61 in; e - Geometry Factor:0.23; Grease Lubrication - M/N Seal:2200 rpm; Dimension D:5.25 in; Dimension M:2 in; Dimension KA:1.13 in; C0 - Static Load:31900 lb; Shaft Tolerance:0.0015 in; Dimension P:3.75 in; Housing Style:Take-Up;
Komatsu DUCT 17A-911-4242 DUCT	Unit:Metric Series; Inner Ring:Provided; Basic Load Rating Cr (Dynamic)(kN):3.33; Roller Follower Type:Non-Separate; Roller Type:Crowned Type; Roller Lining:None; Volume Discount:Available; Category:Roller Follower; Allowable Rotational Speed(rpm):8000; d:6;
Komatsu DUCT 418-07-33820 DUCT	Precision:Class 0; RoHS:6; d:10; Allowable Rotational Speed(rpm):24000; Type:Ball; Rolling Element Material:440C Stainless Steel; Inner/Outer Ring Material:440C Stainless Steel; Specifications, Environment:Standard / Heat Resi; Volume Discount:Available;
Komatsu DUCT 21T-979-6361 DUCT	Unit Body Material:Cast Iron; Basic Load Rating, Static Rating(N):15400; Stroke:No; Diameter series symbol:Used for Light load; Pillow Type, Category:Standard; Surface Treatment:No; Bearing Unit, Type:Pillow Type; Days to Ship:Quote; Fit:J7;