Komatsu DOOR ASS'Y YNNKF20011KF DOOR ASS'Y	Y0:0.86; Mass:0.35 kg; Nlim (oil):7,400 rpm; Static load, C0:58 kN; Characteristic rolling element frequency, BSF:6.83 Hz; Min operating temperature, Tmin:-40 °C; ra max:0.8 mm; d1:51 mm; Brand:NTN; Nlim (grease):5,600 rpm;
Komatsu DOOR ASS'Y WT94201H37A0KF DOOR ASS'Y	Ca90 - Dynamic Thrust Rating (90 million revolutions)7:7620 lbf; Cone Part Number:69354; R - Cone Backface To Clear Radius3:0.09 in; C0 - Static Radial Rating:51700 lbf; K - Factor8:1.38; C90 - Dynamic Radial Rating (90 million revolutions)5:10500 lbf; db - Cone Backface Backing Diameter:4.06 in; a - Effective Center Location4:-0.02 in; Cg - Geometry Factor:0.0874; Aa - Cage-Cone Backface Clearance:0.12 in;
Komatsu DOOR ASS'Y WT94201H37A0KF DOOR ASS'Y	Designation of housing:SP208-210/90-; S:24.6 mm; G:R1/8"; H:120 mm; SW:3.97 mm; A:31 mm; Weight:4.2 kg; B1:62.7 mm; H2:61 mm; C:35.1 kN;
Komatsu DOOR ASS'Y 20Y-53-00890 DOOR ASS'Y	Eng Internal Radial Clearance - Max:0.0026; Shaft Size  :60 mm; Dimension F:5.0000 in; Engineering Group:Mounted Bearing; Shaft Tolerance:0.0015 in; Dimension RAA:0.65 in; Full Timken Part Number:QAAMC13A060SB; Dimension L Exp:3.46 in; Eng Internal Radial Clearance - Min:0.0016; Dimension D:0.19 in;
Komatsu DOOR ASS'Y TW417-10012KF DOOR ASS'Y	r:0.6; C:17 mm; m:5.5 mm; C1:4.3 mm; Recommended tightening torque for set screw:5.5 Nm; S:14.3 mm; T min.:-20 °C; SW:3 mm; Weight:0.21 kg; C0:7.88 kN;
Komatsu DOOR ASS'Y 421-925-6084 DOOR ASS'Y	N1:25 mm; T max.:100 °C; S:11.8 mm; d:55.56 mm; Recommended tightening torque for set screw:8 Nm; H2:126 mm; L:219 mm; T min.:-40 °C; J:171 mm; C0:29.2 kN;
Komatsu DOOR ASS'Y 201-54-80054CQ DOOR ASS'Y	d:105; Unit, Type:Bearing unit; Surface Treatment:No; Bearing Unit, Type:Pillow Type; Bearing Inner Dia. Shape:Cylindrical Bore Set; Heat Resistant Characteristics:Standard; Pillow Type, Category:Standard; Lubrication method:Oil-Free Type;
Komatsu DOOR ASS'Y 42C-56-31101 DOOR ASS'Y	N1:25 mm; T max.:100 °C; S:11.8 mm; d:55.56 mm; Recommended tightening torque for set screw:8 Nm; H2:126 mm; L:219 mm; T min.:-40 °C; J:171 mm; C0:29.2 kN;