Komatsu SERVICE KIT 714-17-05031 SERVICE KIT	RoHS:6; Bearing Used:Deep Groove Ball Bea; Volume Discount:Available; Number of Bearings:Double; Seals:ZZ (Double Shield); Housing Material:1045 Carbon Steel; Shape:Flanged Pilot Type; Holder Width(inch):1-3/4;
Komatsu SERVICE KIT 42C-S9-05110 SERVICE KIT	Bearing number:36972; Size (mm):360x480x218; Bore Diameter (mm):360; Outer Diameter (mm):480; Width (mm):218; d:360 mm; D:480 mm; T:218 mm; r1 min.:3 mm; r2 min.:3 mm; A:51,75 mm; db min:382 mm; Db min.:450 mm; ra max.:4 mm; Weight:113 Kg; Basic dynamic load rating (C):2170 kN; Basic static load rating (C0):5992 kN; (Grease) Lubrication Speed:240 r/min; (Oil) Lubrication Speed:320 r/min; Calculation factor (e):0,43;
Komatsu SERVICE KIT 428-15-05211 SERVICE KIT	S:19 mm; SW:3.97 mm; B:49.2 mm; Recommended tightening torque for set screw:8 Nm; G:M6x1; Designation of bearing:UC209-26G2L3; s1:24.6 mm; H:110 mm; Designation of housing:C209-; T max.:100 °C;
Komatsu SERVICE KIT 714-15-05184 SERVICE KIT	A2:53.3 mm; C:25.7 kN; Designation of housing:FE207N-; B:37.6 mm; N:14mm; B1:51.1 mm; Z:32 mm; T max.:200 °C; Recommended tightening torque for set screw:11.5 Nm; S:18.8 mm;
Komatsu SERVICE KIT 707-99-67095 SERVICE KIT	A2:53.3 mm; C:25.7 kN; Designation of housing:FE207N-; B:37.6 mm; N:14mm; B1:51.1 mm; Z:32 mm; T max.:200 °C; Recommended tightening torque for set screw:11.5 Nm; S:18.8 mm;
Komatsu SERVICE KIT 707-99-26135 SERVICE KIT	T min.:-20 °C; SW:3.97 mm; H2:61 mm; B1:43.7 mm; s1:33.4 mm; A5:19.2 mm; C:35.1 kN; G:R1/8"; H:120 mm; S:11 mm;
Komatsu SERVICE KIT 707-99-43320 SERVICE KIT	d:4.0000 in; radial dynamic load capacity:5500 lb; D:9.2500 in; radial static load capacity:5500 lb; outer ring width:6-1/4 in; maximum rpm:1250 RPM; inner ring width:8-1/2 in; seal type:Labyrinth; bearing type:Taper Roller; finish/coating:Uncoated; locking device:Adapter Mount; manufacturer catalog number:066585; bearing material:Cast Iron;
Komatsu SERVICE KIT 707-99-37070 SERVICE KIT	RoHS:6; Bearing Used:Deep Groove Ball Bea; Days to Ship:7 Days; Type:Bearings with Housin; Shape:Flange Type; Bearing Material:[Steel] Steel; Flange O.D. H(φ):81; Seals:VV (Non-Contact Rubb;