Komatsu SERVICE KIT 707-98-55530 SERVICE KIT | S:19 mm; SW:3.97 mm; B:49.2 mm; Recommended tightening torque for set screw:8 Nm; G:M6x1; Designation of bearing:UC209-26G2L3; s1:24.6 mm; H:110 mm; Designation of housing:C209-; T max.:100 °C; |
Komatsu SERVICE KIT 707-99-76330 SERVICE KIT | Bearing I.D. d(mm):12; RoHS:6; Type:Bearings with Housin; Shape:Flange Type; Flange Shape:Compact Type; Width T(mm):20; Seals:ZZ (Double Shield); Volume Discount:Available; Bearing Material:Stainless Steel; Number of Bearings:Double; |
Komatsu SERVICE KIT 42C-15-05090 SERVICE KIT | T min.:-20 °C; SW:3.97 mm; H2:61 mm; B1:43.7 mm; s1:33.4 mm; A5:19.2 mm; C:35.1 kN; G:R1/8"; H:120 mm; S:11 mm; |
Komatsu SERVICE KIT 707-99-26135 SERVICE KIT | rs min:1.5 mm; f0:14.4; d:60 mm; Characteristic cage frequency, FTF:0.41 Hz; Min operating temperature, Tmin:-40 °C; da min:68 mm; Fatigue limit load, Cu:1.65 kN; Static load, C0:36.3 kN; Max operating temperature, Tmax:120 °C; Dynamic load, C:51.6 kN; |
Komatsu SERVICE KIT 175-63-05140 SERVICE KIT | Bearing I.D. d(mm):12; RoHS:6; Type:Bearings with Housin; Shape:Flange Type; Flange Shape:Compact Type; Width T(mm):20; Seals:ZZ (Double Shield); Volume Discount:Available; Bearing Material:Stainless Steel; Number of Bearings:Double; |
Komatsu SERVICE KIT 707-99-43320 SERVICE KIT | A2:53.3 mm; C:25.7 kN; Designation of housing:FE207N-; B:37.6 mm; N:14mm; B1:51.1 mm; Z:32 mm; T max.:200 °C; Recommended tightening torque for set screw:11.5 Nm; S:18.8 mm; |
Komatsu SERVICE KIT 707-98-26170 SERVICE KIT | db - Cone Backface Backing Diameter:6.73 in; Series:HM133400; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:15800 lbf; Aa - Cage-Cone Backface Clearance:0.06 in; Cone Part Number:HM133444; Ab - Cage-Cone Frontface Clearance:0.07 in; Cg - Geometry Factor:0.134; C1 - Dynamic Radial Rating (1 million revolutions)6:135000 lbf; da - Cone Frontface Backing Diameter:6.73 in; K - Factor8:2.21; |
Komatsu SERVICE KIT 714-07-05151 SERVICE KIT | S:19 mm; SW:3.97 mm; B:49.2 mm; Recommended tightening torque for set screw:8 Nm; G:M6x1; Designation of bearing:UC209-26G2L3; s1:24.6 mm; H:110 mm; Designation of housing:C209-; T max.:100 °C; |