Komatsu LADDER 416-944-4121 LADDER	A1:18 mm; T max.:200 °C; C0:32.8 kN; Designation of housing:FL212N-; Weight:3.74 kg; Recommended tightening torque for set screw:22 Nm; N:23mm; H:250 mm; Designation of open end cover:SCO212-60; S:14.9 mm;
Komatsu LADDER 208-54-63870 LADDER	Dimension H:4.409 in; Maximum Speed:2790 rpm; Bearing - Housing - Seal:LSE307BXH; Note:This product line wa; Dimension L:15.0 in; Cor - Static Load Rating:51931 lbf; Bearing UPC:013992026354; Dimension M:3.5 in; Housing Width:5.3 in; Support Type:Two-Bolt Plummer Blo;
Komatsu LADDER 416-54-64120 LADDER	d:47.62 mm; H1:14 mm; S:19 mm; G:M6x1; N:M16; J:94 mm; T max.:100 °C; Weight:2.67 kg; L1:35 mm; C:35.1 kN;
Komatsu LADDER 424-54-34491 LADDER	Da - Cup Frontface Backing Diameter:8.15 in; Cg - Geometry Factor7:0.122; C - Double Cup Width:5.3750 in; Y - ISO Factor1:2.27; Series:HM129800; e - ISO Factor4:0.26; K - Factor3:2.21; Y1 - ISO Factor5:2.55; r - Cup Frontface To Clear Radius2:0.03 in; Design Units:Imperial;
Komatsu LADDER 41E-54-14450 LADDER	Designation of bearing:US203-11G2T20; L1:20 mm; Z:42.6 mm; J:48 mm; G:M6x1; B:22 mm; C0:4.78 kN; C:9.55 kN; T min.:-20 °C; E:9 mm;
Komatsu LADDER 20Y-54-83620 LADDER	T max.:200 °C; Weight:2.6 kg; G:R1/8"; Recommended tightening torque for set screw:11.5 Nm; S:11 mm; L1:61 mm; H2:115 mm; C0:23.2 kN; T min.:-20 °C; B:30.2 mm;
Komatsu LADDER 20Y-54-83620 LADDER	A1:18 mm; T max.:200 °C; C0:32.8 kN; Designation of housing:FL212N-; Weight:3.74 kg; Recommended tightening torque for set screw:22 Nm; N:23mm; H:250 mm; Designation of open end cover:SCO212-60; S:14.9 mm;
Komatsu LADDER 418-944-6340 LADDER	T max.:200 °C; Weight:2.6 kg; G:R1/8"; Recommended tightening torque for set screw:11.5 Nm; S:11 mm; L1:61 mm; H2:115 mm; C0:23.2 kN; T min.:-20 °C; B:30.2 mm;