Komatsu ADAPTER 791-616-1160 ADAPTER	Nref:2,300 rpm; Y1:2.12; Nlim:3,000 rpm; ra max:2 mm; Characteristic outer ring frequency, BPF0:7.62 Hz; B:69.8 mm; Brand:SNR; Ce min:17 mm; b:10.5 mm; d2:130.2 mm;
Komatsu ADAPTER 23A-06-41470 ADAPTER	Nref:2,300 rpm; Y1:2.12; Nlim:3,000 rpm; ra max:2 mm; Characteristic outer ring frequency, BPF0:7.62 Hz; B:69.8 mm; Brand:SNR; Ce min:17 mm; b:10.5 mm; d2:130.2 mm;
Komatsu ADAPTER 6751-51-1210 ADAPTER	Shaft Size d:1.969 in; Total Length L:200.00 mm; Center of Bearing from End S:13.5 mm; Bolt Hole Spacing J:158.00 mm; Bearing Number:GYAE50RRB; Static Load Rating:5210 lbf; Housing Style:Two-Bolt Pillow Bloc; Total Height H2:114.3 mm; Bearing Type:Ball Bearing; Base to Center Height H:57.2 mm;
Komatsu ADAPTER 790-101-2460 ADAPTER	Number of Bearings:Double; Volume Discount:Available; Bearing Used:Deep Groove Ball Bea; Bearing Part Number:6001; Shape:Flanged Pilot Type; Bearing Material:[Steel] Steel; Flange O.D. H(φ):54; Type:Bearings with Housin; Flange Shape:Square Type;
Komatsu ADAPTER 791-616-1210 ADAPTER	S:12.7 mm; A:25.5 mm; T max.:200 °C; A2:28.3 mm; Recommended tightening torque for set screw:5.5 Nm; Weight:0.71 kg; B:31 mm; C0:6.65 kN; s1:15.5 mm; Designation of housing:FC204N-;
Komatsu ADAPTER 799-401-2950 ADAPTER	Angle between Set Screws:90 º; Series:Standard; Shaft Size d:1 3/16 in; Weight:0.50 lb; Lubrication Type:Relubricatable; Static Load Rating:2530 lbf; Bearing Type:Ball Bearing; Number of Set Screws:2; O.D. Type:Cylindrical OD; Sub Series:GYA..RR;
Komatsu ADAPTER 566-88-6F860 ADAPTER	Nref:2,300 rpm; Y1:2.12; Nlim:3,000 rpm; ra max:2 mm; Characteristic outer ring frequency, BPF0:7.62 Hz; B:69.8 mm; Brand:SNR; Ce min:17 mm; b:10.5 mm; d2:130.2 mm;
Komatsu ADAPTER 21N-70-41241 ADAPTER	R - Cone Backface To Clear Radius3:0.06 in; B - Cone Width:1.0625 in; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:8190 lbf; Cg - Geometry Factor:0.0697; C0 - Static Radial Rating:20500 lbf; Cone Part Number:23491; C1 - Dynamic Radial Rating (1 million revolutions)6:18100 lbf; K - Factor8:1.66; d:1.2500 in; G2 - Heat Generation Factor (Rib-Roller End):10.4;