Komatsu TENSION 37B-ZB6-5060SAKF 9EXTENSION FOR	Category:Bearings; Product Group:B04334; Cb min:5.5 mm; Nlim (oil):5,300 rpm; Weight / Kilogram:0; Fatigue limit load, Cu:13.3 kN; Mass:0.65 kg; Rating life coefficient, A2:1; Characteristic inner ring frequency, BPFI:10.85 Hz; Y0:0.79;
Komatsu TENSION 37B-ZE8-2110SAKF 9EXTENSION FOR	Designation of open end cover:SCOU207-20; A:21 mm; Z:54.4 mm; H:98 mm; SW:3.97 mm; Designation of closed end cover:SCC207; H2:41 mm; L:274 mm; L1:225 mm; S:17.5 mm;
Komatsu TENSION 6215-61-3702 TENSION PULLEY	Y2 - ISO Factor10:2.5; Cg - Geometry Factor11:0.0984; Db - Cup Backface Backing Diameter:3.98 in; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:10000 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:3970 lbf; C - Cup Width:0.7411 in; r - Cup Backface To Clear Radius2:0.050 in; Bearing Weight:4.3 lb; e - ISO Factor8:0.4; Cup Part Number:394A;
Komatsu TENSION 37B-ZA5-2190NKKF EXTENSION FORK	Z:27.5 mm; s1:19.05 mm; L:80 mm; A2:40.2 mm; A:31 mm; C:19.5 kN; d:28.58 mm; A1:13 mm; Designation of housing:FL206N-; J:117 mm;
Komatsu TENSION 37B-ZD5-4050NKKF EXTENSION FORK	G:R1/8"; s1:15.5 mm; T min.:-20 °C; SW:3 mm; A:21 mm; A5:18.3 mm; H2:41 mm; Designation of bearing:UC202G2; Recommended tightening torque for set screw:5.5 Nm; C:12.8 kN;
Komatsu TENSION 6215-61-6700 TENSION PULLEY	Dimension T:20.0 in; Dimension R:17.2 in; Bolt Size:4 x M24; Seal Type:High Temperature Pac; Ca - Axial Load Rating:8183 lbf; Bearing Type:Split Cylindrical Re; Maximum Speed:1220 rpm; Cr - Dynamic Load Rating:117800 lbf; Bearing - Housing - Seal:LSE612BRHHTPS; Note:This product line wa;
Komatsu TENSION 6217-61-3702 TENSION PULLEY	T min.:-20 °C; J:49 mm; G:M6x1; d:19.05 mm; s1:15.5 mm; Designation of open end cover:SCOU204-12; A:38 mm; H1:14 mm; Recommended tightening torque for set screw:3.7 Nm; H:33.3 mm;
Komatsu TENSION 37B-ZD5-4020YLKF EXTENSION FORK	G:R1/8"; s1:15.5 mm; T min.:-20 °C; SW:3 mm; A:21 mm; A5:18.3 mm; H2:41 mm; Designation of bearing:UC202G2; Recommended tightening torque for set screw:5.5 Nm; C:12.8 kN;