Komatsu PAD 17M-43-52430 PAD	D:180 mm; Max operating temperature, Tmax:110 °C; Mass:4.23 kg; Dynamic load, C:133 kN; Nlim (grease):3,800 rpm; Da max:167 mm; da min:98 mm; Static load, C0:97 kN; Fatigue limit load, Cu:3.85 kN; f0:13.3;
Komatsu PAD MC7627935410 PAD	D:180 mm; Max operating temperature, Tmax:110 °C; Mass:4.23 kg; Dynamic load, C:133 kN; Nlim (grease):3,800 rpm; Da max:167 mm; da min:98 mm; Static load, C0:97 kN; Fatigue limit load, Cu:3.85 kN; f0:13.3;
Komatsu PAD 23B-953-1770 PAD	H:54 mm; S:10.2 mm; N:17mm; T min.:-20 °C; A1:37 mm; Designation of bearing:US209-28G2T20; H1:20 mm; L1:60 mm; Z:70 mm; T max.:200 °C;
Komatsu PAD 567-54-73331 PAD	C:25.7 kN; A2:42.5 mm; N:14mm; s1:16 mm; Designation of bearing:US207-22G2T20; L:117 mm; T max.:200 °C; G:M6x1; C0:15.2 kN; B:32 mm;
Komatsu PAD 23S-75-53530 PAD	f0:14.8; Characteristic rolling element frequency, BSF:5.98 Hz; B:7 mm; ra max:0.3 mm; Da max:26 mm; Static load, C0:2 kN; Characteristic inner ring frequency, BPFI:6.4 Hz; Mass:0.02 kg; Fatigue limit load, Cu:0.09 kN; da min:17 mm;
Komatsu PAD 42C-56-31281 PAD	N:18mm; C0:29.2 kN; B:55.4 mm; B1:71.3 mm; T min.:-20 °C; Weight:3.83 kg; Recommended tightening torque for set screw:22 Nm; L1:68 mm; Designation of open end cover:SCOE211-55; G:R1/8";
Komatsu PAD 56E-54-23514 PAD	Shape:Flanged Pilot Type; Bearing I.D. d(mm):20; Seals:VV (Non-Contact Rubb; Flange O.D. H(φ):81; Holder Surface Treatment:Clear Anodize; Flange Shape:Round Type; Number of Bearings:Single; Bearing Material:[Steel] Steel; Volume Discount:Available;
Komatsu PAD 198-43-63641 PAD	D:180 mm; Max operating temperature, Tmax:110 °C; Mass:4.23 kg; Dynamic load, C:133 kN; Nlim (grease):3,800 rpm; Da max:167 mm; da min:98 mm; Static load, C0:97 kN; Fatigue limit load, Cu:3.85 kN; f0:13.3;