Komatsu PAD 195-30-66181 PAD | C:25.7 kN; A2:42.5 mm; N:14mm; s1:16 mm; Designation of bearing:US207-22G2T20; L:117 mm; T max.:200 °C; G:M6x1; C0:15.2 kN; B:32 mm; |
Komatsu PAD 56B-54-23541 PAD | f0:14.8; Characteristic rolling element frequency, BSF:5.98 Hz; B:7 mm; ra max:0.3 mm; Da max:26 mm; Static load, C0:2 kN; Characteristic inner ring frequency, BPFI:6.4 Hz; Mass:0.02 kg; Fatigue limit load, Cu:0.09 kN; da min:17 mm; |
Komatsu PAD 8211-70-3232 PAD | N1:25 mm; C0:23.2 kN; Recommended tightening torque for set screw:22 Nm; L1:65 mm; H:57.2 mm; T max.:100 °C; d:50 mm; H2:114 mm; Designation of housing:P210N-; J:159 mm; |
Komatsu PAD 21W-957-2321 PAD | L1:70 mm; B:65.1 mm; C:52.5 kN; L:241 mm; T min.:-40 °C; S:25.4 mm; C0:32.8 kN; N1:25 mm; Weight:5.07 kg; Designation of housing:P212N-; |
Komatsu PAD 103-Y79-2133 PAD | N:18mm; C0:29.2 kN; B:55.4 mm; B1:71.3 mm; T min.:-20 °C; Weight:3.83 kg; Recommended tightening torque for set screw:22 Nm; L1:68 mm; Designation of open end cover:SCOE211-55; G:R1/8"; |
Komatsu PAD 198-30-69120 PAD | N:18mm; C0:29.2 kN; B:55.4 mm; B1:71.3 mm; T min.:-20 °C; Weight:3.83 kg; Recommended tightening torque for set screw:22 Nm; L1:68 mm; Designation of open end cover:SCOE211-55; G:R1/8"; |
Komatsu PAD CA0048646 PAD KIT | Surface Treatment:No; Unit, Type:Insert Bearing Unit; Bearing Inner Dia. Shape:Cylindrical Bore Set; Fit:J7; d:12; RoHS:6; Rolling Element Material:Bearing Steel; |
Komatsu PAD 21W-957-2320 PAD | Shape:Flanged Pilot Type; Bearing I.D. d(mm):20; Seals:VV (Non-Contact Rubb; Flange O.D. H(φ):81; Holder Surface Treatment:Clear Anodize; Flange Shape:Round Type; Number of Bearings:Single; Bearing Material:[Steel] Steel; Volume Discount:Available; |