Komatsu PAD 419-54-15572 PAD	Holder Surface Treatment:Black Oxide Coating; Shape:Flanged Pilot Type; Bearing Used:Deep Groove Ball Bea; Housing Material:1045 Carbon Steel; RoHS:6; Bearing Retained:No; Flange O.D. H(φ):96; Width T(mm):55 ～ 80; Bearing I.D. d(mm):30;
Komatsu PAD 103-Y78-1312 PAD	Da max:159 mm; D:170 mm; Nlim (grease):3,400 rpm; Min operating temperature, Tmin:-20 °C; Radial clearance class:C3; Ce min:7 mm; Static load, C0:27.1 kN; rs min:2.1 mm; ra max:2 mm; Associated sleeve reference:H219X;
Komatsu PAD 195-30-68130 PAD	Accessory:No Cover; Machining:No; Surface Treatment:No; Stroke:No; B:100; Fit:J7; Rolling Element Material:Bearing Steel; Grease Type:Standard Grease; Pillow Type, Category:Standard;
Komatsu PAD 154-54-42470 PAD	Da max:159 mm; D:170 mm; Nlim (grease):3,400 rpm; Min operating temperature, Tmin:-20 °C; Radial clearance class:C3; Ce min:7 mm; Static load, C0:27.1 kN; rs min:2.1 mm; ra max:2 mm; Associated sleeve reference:H219X;
Komatsu PAD 195-30-68130 PAD	L1:70 mm; B:65.1 mm; C:52.5 kN; L:241 mm; T min.:-40 °C; S:25.4 mm; C0:32.8 kN; N1:25 mm; Weight:5.07 kg; Designation of housing:P212N-;
Komatsu PAD 198-43-63641 PAD	D:180 mm; Max operating temperature, Tmax:110 °C; Mass:4.23 kg; Dynamic load, C:133 kN; Nlim (grease):3,800 rpm; Da max:167 mm; da min:98 mm; Static load, C0:97 kN; Fatigue limit load, Cu:3.85 kN; f0:13.3;
Komatsu PAD 56B-54-23530 PAD	Da max:159 mm; D:170 mm; Nlim (grease):3,400 rpm; Min operating temperature, Tmin:-20 °C; Radial clearance class:C3; Ce min:7 mm; Static load, C0:27.1 kN; rs min:2.1 mm; ra max:2 mm; Associated sleeve reference:H219X;
Komatsu PAD 42N-46-11430 PAD	f0:14.8; Characteristic rolling element frequency, BSF:5.98 Hz; B:7 mm; ra max:0.3 mm; Da max:26 mm; Static load, C0:2 kN; Characteristic inner ring frequency, BPFI:6.4 Hz; Mass:0.02 kg; Fatigue limit load, Cu:0.09 kN; da min:17 mm;