Komatsu PAD 567-54-73270 PAD	Shape:Flanged Pilot Type; Bearing I.D. d(mm):20; Seals:VV (Non-Contact Rubb; Flange O.D. H(φ):81; Holder Surface Treatment:Clear Anodize; Flange Shape:Round Type; Number of Bearings:Single; Bearing Material:[Steel] Steel; Volume Discount:Available;
Komatsu PAD 567-54-73391 PAD	Machining:No; Unit, Type:Insert Bearing Unit; Basic Load Rating, Dynamic Rating(N):72700; Bearing Inner Dia. Shape:Cylindrical Bore Set; Seal:Nitrile; Stroke:No; Fit:J7; Grease Type:Standard Grease; Rolling Element Material:Bearing Steel;
Komatsu PAD 56B-54-23541 PAD	f0:14.8; Characteristic rolling element frequency, BSF:5.98 Hz; B:7 mm; ra max:0.3 mm; Da max:26 mm; Static load, C0:2 kN; Characteristic inner ring frequency, BPFI:6.4 Hz; Mass:0.02 kg; Fatigue limit load, Cu:0.09 kN; da min:17 mm;
Komatsu PAD 170-50-12110 PAD	Da max:159 mm; D:170 mm; Nlim (grease):3,400 rpm; Min operating temperature, Tmin:-20 °C; Radial clearance class:C3; Ce min:7 mm; Static load, C0:27.1 kN; rs min:2.1 mm; ra max:2 mm; Associated sleeve reference:H219X;
Komatsu PAD 23A-952-7170 PAD	f0:14.8; Characteristic rolling element frequency, BSF:5.98 Hz; B:7 mm; ra max:0.3 mm; Da max:26 mm; Static load, C0:2 kN; Characteristic inner ring frequency, BPFI:6.4 Hz; Mass:0.02 kg; Fatigue limit load, Cu:0.09 kN; da min:17 mm;
Komatsu PAD MC7627935450 PAD	D:180 mm; Max operating temperature, Tmax:110 °C; Mass:4.23 kg; Dynamic load, C:133 kN; Nlim (grease):3,800 rpm; Da max:167 mm; da min:98 mm; Static load, C0:97 kN; Fatigue limit load, Cu:3.85 kN; f0:13.3;
Komatsu PAD 198-30-66130 PAD	N:18mm; C0:29.2 kN; B:55.4 mm; B1:71.3 mm; T min.:-20 °C; Weight:3.83 kg; Recommended tightening torque for set screw:22 Nm; L1:68 mm; Designation of open end cover:SCOE211-55; G:R1/8";
Komatsu PAD 14X-43-52110 PAD	Seals:DD (Contact Rubber S; Shape:Flange Type; Bearing I.D. d(mm):10; Bearing Used:Deep Groove Ball Bea; Days to Ship:7 Days; Number of Bearings:Double; Housing Material:1045 Carbon Steel; Bearing Part Number:6900; Type:Bearings with Housin;