Komatsu PAD 17M-43-52430 PAD	L1:70 mm; B:65.1 mm; C:52.5 kN; L:241 mm; T min.:-40 °C; S:25.4 mm; C0:32.8 kN; N1:25 mm; Weight:5.07 kg; Designation of housing:P212N-;
Komatsu PAD 567-54-73331 PAD	C:25.7 kN; A2:42.5 mm; N:14mm; s1:16 mm; Designation of bearing:US207-22G2T20; L:117 mm; T max.:200 °C; G:M6x1; C0:15.2 kN; B:32 mm;
Komatsu PAD 8211-70-3232 PAD	N1:25 mm; C0:23.2 kN; Recommended tightening torque for set screw:22 Nm; L1:65 mm; H:57.2 mm; T max.:100 °C; d:50 mm; H2:114 mm; Designation of housing:P210N-; J:159 mm;
Komatsu PAD 8211-70-3232 PAD	f0:14.8; Characteristic rolling element frequency, BSF:5.98 Hz; B:7 mm; ra max:0.3 mm; Da max:26 mm; Static load, C0:2 kN; Characteristic inner ring frequency, BPFI:6.4 Hz; Mass:0.02 kg; Fatigue limit load, Cu:0.09 kN; da min:17 mm;
Komatsu PAD 23B-953-1770 PAD	H:54 mm; S:10.2 mm; N:17mm; T min.:-20 °C; A1:37 mm; Designation of bearing:US209-28G2T20; H1:20 mm; L1:60 mm; Z:70 mm; T max.:200 °C;
Komatsu PAD 567-54-73321 PAD	Accessory:No Cover; Machining:No; Surface Treatment:No; Stroke:No; B:100; Fit:J7; Rolling Element Material:Bearing Steel; Grease Type:Standard Grease; Pillow Type, Category:Standard;
Komatsu PAD 56E-54-23514 PAD	L1:70 mm; B:65.1 mm; C:52.5 kN; L:241 mm; T min.:-40 °C; S:25.4 mm; C0:32.8 kN; N1:25 mm; Weight:5.07 kg; Designation of housing:P212N-;
Komatsu PAD 567-89-72221 PAD	Holder Surface Treatment:Black Oxide Coating; Shape:Flanged Pilot Type; Bearing Used:Deep Groove Ball Bea; Housing Material:1045 Carbon Steel; RoHS:6; Bearing Retained:No; Flange O.D. H(φ):96; Width T(mm):55 ～ 80; Bearing I.D. d(mm):30;