Komatsu PAD 195-50-41800 PAD ASS'Y	N:18mm; C0:29.2 kN; B:55.4 mm; B1:71.3 mm; T min.:-20 °C; Weight:3.83 kg; Recommended tightening torque for set screw:22 Nm; L1:68 mm; Designation of open end cover:SCOE211-55; G:R1/8";
Komatsu PAD 17M-43-52430 PAD	L1:70 mm; B:65.1 mm; C:52.5 kN; L:241 mm; T min.:-40 °C; S:25.4 mm; C0:32.8 kN; N1:25 mm; Weight:5.07 kg; Designation of housing:P212N-;
Komatsu PAD 17A-43-46810 PAD	C:25.7 kN; A2:42.5 mm; N:14mm; s1:16 mm; Designation of bearing:US207-22G2T20; L:117 mm; T max.:200 °C; G:M6x1; C0:15.2 kN; B:32 mm;
Komatsu PAD MUMA05G-0-2170 PAD	B1:51.1 mm; H2:94 mm; L1:54 mm; s1:36.3 mm; d1:51.1 mm; S:18.8 mm; N1:21 mm; C:25.7 kN; H:47.6 mm; B:37.6 mm;
Komatsu PAD 195-30-66181 PAD	C:25.7 kN; A2:42.5 mm; N:14mm; s1:16 mm; Designation of bearing:US207-22G2T20; L:117 mm; T max.:200 °C; G:M6x1; C0:15.2 kN; B:32 mm;
Komatsu PAD 425-56-21310 PAD	Da max:159 mm; D:170 mm; Nlim (grease):3,400 rpm; Min operating temperature, Tmin:-20 °C; Radial clearance class:C3; Ce min:7 mm; Static load, C0:27.1 kN; rs min:2.1 mm; ra max:2 mm; Associated sleeve reference:H219X;
Komatsu PAD 567-54-73391 PAD	Accessory:No Cover; Machining:No; Surface Treatment:No; Stroke:No; B:100; Fit:J7; Rolling Element Material:Bearing Steel; Grease Type:Standard Grease; Pillow Type, Category:Standard;
Komatsu PAD 195-30-69131 PAD	f0:14.8; Characteristic rolling element frequency, BSF:5.98 Hz; B:7 mm; ra max:0.3 mm; Da max:26 mm; Static load, C0:2 kN; Characteristic inner ring frequency, BPFI:6.4 Hz; Mass:0.02 kg; Fatigue limit load, Cu:0.09 kN; da min:17 mm;