Komatsu PAD 8287-70-2890 PAD	Accessory:No Cover; Machining:No; Surface Treatment:No; Stroke:No; B:100; Fit:J7; Rolling Element Material:Bearing Steel; Grease Type:Standard Grease; Pillow Type, Category:Standard;
Komatsu PAD 3RB-31-51430KF PAD ASS'Y	f0:14.8; Characteristic rolling element frequency, BSF:5.98 Hz; B:7 mm; ra max:0.3 mm; Da max:26 mm; Static load, C0:2 kN; Characteristic inner ring frequency, BPFI:6.4 Hz; Mass:0.02 kg; Fatigue limit load, Cu:0.09 kN; da min:17 mm;
Komatsu PAD 17M-43-52430 PAD	L1:70 mm; B:65.1 mm; C:52.5 kN; L:241 mm; T min.:-40 °C; S:25.4 mm; C0:32.8 kN; N1:25 mm; Weight:5.07 kg; Designation of housing:P212N-;
Komatsu PAD 567-54-73261 PAD	f0:14.8; Characteristic rolling element frequency, BSF:5.98 Hz; B:7 mm; ra max:0.3 mm; Da max:26 mm; Static load, C0:2 kN; Characteristic inner ring frequency, BPFI:6.4 Hz; Mass:0.02 kg; Fatigue limit load, Cu:0.09 kN; da min:17 mm;
Komatsu PAD 42C-56-31260 PAD	N:18mm; C0:29.2 kN; B:55.4 mm; B1:71.3 mm; T min.:-20 °C; Weight:3.83 kg; Recommended tightening torque for set screw:22 Nm; L1:68 mm; Designation of open end cover:SCOE211-55; G:R1/8";
Komatsu PAD 21W-957-2320 PAD	D:180 mm; Max operating temperature, Tmax:110 °C; Mass:4.23 kg; Dynamic load, C:133 kN; Nlim (grease):3,800 rpm; Da max:167 mm; da min:98 mm; Static load, C0:97 kN; Fatigue limit load, Cu:3.85 kN; f0:13.3;
Komatsu PAD 17M-43-52430 PAD	D:180 mm; Max operating temperature, Tmax:110 °C; Mass:4.23 kg; Dynamic load, C:133 kN; Nlim (grease):3,800 rpm; Da max:167 mm; da min:98 mm; Static load, C0:97 kN; Fatigue limit load, Cu:3.85 kN; f0:13.3;
Komatsu PAD 56E-54-23514 PAD	L1:70 mm; B:65.1 mm; C:52.5 kN; L:241 mm; T min.:-40 °C; S:25.4 mm; C0:32.8 kN; N1:25 mm; Weight:5.07 kg; Designation of housing:P212N-;