Komatsu PAD 567-54-73261 PAD	f0:14.8; Characteristic rolling element frequency, BSF:5.98 Hz; B:7 mm; ra max:0.3 mm; Da max:26 mm; Static load, C0:2 kN; Characteristic inner ring frequency, BPFI:6.4 Hz; Mass:0.02 kg; Fatigue limit load, Cu:0.09 kN; da min:17 mm;
Komatsu PAD 198-30-66130 PAD	N:18mm; C0:29.2 kN; B:55.4 mm; B1:71.3 mm; T min.:-20 °C; Weight:3.83 kg; Recommended tightening torque for set screw:22 Nm; L1:68 mm; Designation of open end cover:SCOE211-55; G:R1/8";
Komatsu PAD 195-30-68130 PAD	Holder Surface Treatment:Black Oxide Coating; Shape:Flanged Pilot Type; Bearing Used:Deep Groove Ball Bea; Housing Material:1045 Carbon Steel; RoHS:6; Bearing Retained:No; Flange O.D. H(φ):96; Width T(mm):55 ～ 80; Bearing I.D. d(mm):30;
Komatsu PAD 42N-46-11430 PAD	f0:14.8; Characteristic rolling element frequency, BSF:5.98 Hz; B:7 mm; ra max:0.3 mm; Da max:26 mm; Static load, C0:2 kN; Characteristic inner ring frequency, BPFI:6.4 Hz; Mass:0.02 kg; Fatigue limit load, Cu:0.09 kN; da min:17 mm;
Komatsu PAD 20Y-957-2522 PAD	N:18mm; C0:29.2 kN; B:55.4 mm; B1:71.3 mm; T min.:-20 °C; Weight:3.83 kg; Recommended tightening torque for set screw:22 Nm; L1:68 mm; Designation of open end cover:SCOE211-55; G:R1/8";
Komatsu PAD 56E-54-23514 PAD	L1:70 mm; B:65.1 mm; C:52.5 kN; L:241 mm; T min.:-40 °C; S:25.4 mm; C0:32.8 kN; N1:25 mm; Weight:5.07 kg; Designation of housing:P212N-;
Komatsu PAD 363-921-3130 PAD	f0:14.8; Characteristic rolling element frequency, BSF:5.98 Hz; B:7 mm; ra max:0.3 mm; Da max:26 mm; Static load, C0:2 kN; Characteristic inner ring frequency, BPFI:6.4 Hz; Mass:0.02 kg; Fatigue limit load, Cu:0.09 kN; da min:17 mm;
Komatsu PAD 103-Y79-2112 PAD	Holder Surface Treatment:Black Oxide Coating; Shape:Flanged Pilot Type; Bearing Used:Deep Groove Ball Bea; Housing Material:1045 Carbon Steel; RoHS:6; Bearing Retained:No; Flange O.D. H(φ):96; Width T(mm):55 ～ 80; Bearing I.D. d(mm):30;