Komatsu PAD 567-54-73261 PAD	f0:14.8; Characteristic rolling element frequency, BSF:5.98 Hz; B:7 mm; ra max:0.3 mm; Da max:26 mm; Static load, C0:2 kN; Characteristic inner ring frequency, BPFI:6.4 Hz; Mass:0.02 kg; Fatigue limit load, Cu:0.09 kN; da min:17 mm;
Komatsu PAD KV-B730-3750 PAD	C:25.7 kN; A2:42.5 mm; N:14mm; s1:16 mm; Designation of bearing:US207-22G2T20; L:117 mm; T max.:200 °C; G:M6x1; C0:15.2 kN; B:32 mm;
Komatsu PAD 418-923-1350 PAD	N:18mm; C0:29.2 kN; B:55.4 mm; B1:71.3 mm; T min.:-20 °C; Weight:3.83 kg; Recommended tightening torque for set screw:22 Nm; L1:68 mm; Designation of open end cover:SCOE211-55; G:R1/8";
Komatsu PAD 170-50-12110 PAD	N:18mm; C0:29.2 kN; B:55.4 mm; B1:71.3 mm; T min.:-20 °C; Weight:3.83 kg; Recommended tightening torque for set screw:22 Nm; L1:68 mm; Designation of open end cover:SCOE211-55; G:R1/8";
Komatsu PAD 17M-43-52430 PAD	N:18mm; C0:29.2 kN; B:55.4 mm; B1:71.3 mm; T min.:-20 °C; Weight:3.83 kg; Recommended tightening torque for set screw:22 Nm; L1:68 mm; Designation of open end cover:SCOE211-55; G:R1/8";
Komatsu PAD 8211-70-7121 PAD ASS'Y	Holder Surface Treatment:Black Oxide Coating; Shape:Flanged Pilot Type; Bearing Used:Deep Groove Ball Bea; Housing Material:1045 Carbon Steel; RoHS:6; Bearing Retained:No; Flange O.D. H(φ):96; Width T(mm):55 ～ 80; Bearing I.D. d(mm):30;
Komatsu PAD 42C-56-31260 PAD	D:180 mm; Max operating temperature, Tmax:110 °C; Mass:4.23 kg; Dynamic load, C:133 kN; Nlim (grease):3,800 rpm; Da max:167 mm; da min:98 mm; Static load, C0:97 kN; Fatigue limit load, Cu:3.85 kN; f0:13.3;
Komatsu PAD 21W-957-2321 PAD	L1:70 mm; B:65.1 mm; C:52.5 kN; L:241 mm; T min.:-40 °C; S:25.4 mm; C0:32.8 kN; N1:25 mm; Weight:5.07 kg; Designation of housing:P212N-;