Komatsu PAD 3BA-61-68930KF PAD	Da max:159 mm; D:170 mm; Nlim (grease):3,400 rpm; Min operating temperature, Tmin:-20 °C; Radial clearance class:C3; Ce min:7 mm; Static load, C0:27.1 kN; rs min:2.1 mm; ra max:2 mm; Associated sleeve reference:H219X;
Komatsu PAD KV-B730-2650 PAD	Machining:No; Unit, Type:Insert Bearing Unit; Basic Load Rating, Dynamic Rating(N):72700; Bearing Inner Dia. Shape:Cylindrical Bore Set; Seal:Nitrile; Stroke:No; Fit:J7; Grease Type:Standard Grease; Rolling Element Material:Bearing Steel;
Komatsu PAD 198-50-51700 PAD ASS'Y	N1:25 mm; C0:23.2 kN; Recommended tightening torque for set screw:22 Nm; L1:65 mm; H:57.2 mm; T max.:100 °C; d:50 mm; H2:114 mm; Designation of housing:P210N-; J:159 mm;
Komatsu PAD KV-B730-3751 PAD	f0:14.8; Characteristic rolling element frequency, BSF:5.98 Hz; B:7 mm; ra max:0.3 mm; Da max:26 mm; Static load, C0:2 kN; Characteristic inner ring frequency, BPFI:6.4 Hz; Mass:0.02 kg; Fatigue limit load, Cu:0.09 kN; da min:17 mm;
Komatsu PAD 103-Y79-2133 PAD	N:18mm; C0:29.2 kN; B:55.4 mm; B1:71.3 mm; T min.:-20 °C; Weight:3.83 kg; Recommended tightening torque for set screw:22 Nm; L1:68 mm; Designation of open end cover:SCOE211-55; G:R1/8";
Komatsu PAD 562-74-3A530 PAD	N1:25 mm; C0:23.2 kN; Recommended tightening torque for set screw:22 Nm; L1:65 mm; H:57.2 mm; T max.:100 °C; d:50 mm; H2:114 mm; Designation of housing:P210N-; J:159 mm;
Komatsu PAD 567-89-72220 PAD	L1:70 mm; B:65.1 mm; C:52.5 kN; L:241 mm; T min.:-40 °C; S:25.4 mm; C0:32.8 kN; N1:25 mm; Weight:5.07 kg; Designation of housing:P212N-;
Komatsu PAD 195-30-68130 PAD	Accessory:No Cover; Machining:No; Surface Treatment:No; Stroke:No; B:100; Fit:J7; Rolling Element Material:Bearing Steel; Grease Type:Standard Grease; Pillow Type, Category:Standard;