Komatsu STAY 207-54-41123 STAY	e:31 mm; Weight:6.26 kg; S:30.2 mm; Designation of housing:F214-; A:54 mm; s1:37.3 mm; Recommended tightening torque for set screw:27.1 Nm; T min.:-40 °C; T max.:100 °C; J:152 mm;
Komatsu STAY TC5581532111KF STAY	Radial clearance class:CN; d:120 mm; rs min:3 mm; ra max:2.5 mm; Dynamic load, C:207 kN; D:260 mm; Max operating temperature, Tmax:120 °C; Characteristic outer ring frequency, BPF0:3.13 Hz; f0:13.5; Characteristic inner ring frequency, BPFI:4.87 Hz;
Komatsu STAY 3BA-51-42153UCKF STAY,REAR	G1:M24; A2:40 mm; C0:20.8 kN; L3:45 mm; d1:62 mm; SW:3.97 mm; B1:56.3 mm; Designation of housing:EHE209-; A:40 mm; s1:39.7 mm;
Komatsu STAY 426-03-67720 STAY	G1:M24; A2:40 mm; C0:20.8 kN; L3:45 mm; d1:62 mm; SW:3.97 mm; B1:56.3 mm; Designation of housing:EHE209-; A:40 mm; s1:39.7 mm;
Komatsu STAY 569-03-8A150 STAY	G1:M24; A2:40 mm; C0:20.8 kN; L3:45 mm; d1:62 mm; SW:3.97 mm; B1:56.3 mm; Designation of housing:EHE209-; A:40 mm; s1:39.7 mm;
Komatsu STAY 561-54-71330 STAY	Weight:4510.200 lb; Backing Shaft Diameter ds:793.9 mm; Number of Lubrication Holes:16; Width C:750.000 mm; Chamfer rsmin:6.00 mm; Chamfer r1smin2:21.0 mm; Angle of Chamfer r1smin:20º; Inner-Ring Set:730ARXS3064; Bore d:730.000 mm; Static Load Rating Co:24600 kN;
Komatsu STAY 416-S06-5640 STAY	e:31 mm; Weight:6.26 kg; S:30.2 mm; Designation of housing:F214-; A:54 mm; s1:37.3 mm; Recommended tightening torque for set screw:27.1 Nm; T min.:-40 °C; T max.:100 °C; J:152 mm;
Komatsu STAY 418-976-4110 STAY	A:33.7 mm; A2:52.3 mm; Designation of housing:FLE207N-; C:25.7 kN; B1:51.1 mm; Z:58.9 mm; L:92 mm; A1:12.5 mm; s1:36.3 mm; d1:51.1 mm;