Komatsu COOLER 6155-61-6200 AFTER COOLER	Type:Bearings with Housin; Volume Discount:Available; Flange O.D. H(φ):81; Bearing Material:[Steel] Steel; Shape:Flanged Pilot Type; Width T(mm):70; Bearing Used:Deep Groove Ball Bea; Number of Bearings:Double;
Komatsu COOLER 3EC-02-52910KF AFTER COOLER AS	Pillow Type, Category:Standard; Surface Treatment:No; Rolling Element Material:Bearing Steel; Unit Body Material:Cast Iron; Basic Load Rating, Dynamic Rating(N):67400; Diameter series symbol:Used for Light load; Basic Load Rating, Static Rating(N):48300; B:82.6; Accessory:With steel plate cov;
Komatsu COOLER 418-03-52130 AFTER COOLER AS	B:23.8 mm; A:32.1 mm; A2:45.7 mm; d1:44.1 mm; L:80 mm; S:9 mm; C0:11.2 kN; Weight:0.85 kg; Recommended tightening torque for set screw:8 Nm; J:116.5 mm;
Komatsu COOLER 6252-61-7100 COOLER ASS'Y	Z:70.3 mm; S:10.2 mm; N:14mm; J:150 mm; d:44.45 mm; Designation of open end cover:SCOU209-28; s1:20.6 mm; C:31.85 kN; B:41.2 mm; A1:32 mm;
Komatsu COOLER 3FD-04-41140 AFTER COOLER	N:11,5mm; T min.:-20 °C; s1:13.5 mm; A:29.3 mm; B:27 mm; A1:11 mm; d:25 mm; Designation of closed end cover:SCC205; Weight:0.61 kg; Designation of bearing:US205G2T20;
Komatsu COOLER 419-03-42130 COOLER	Contact Angle:15 º; Limiting Speed (Grease):19300 rpm; Limiting Speed (Oil):38600 rpm; d:40 mm; Da - Outer Ring Backing Diameter:73.200 mm; Bearing Weight:0.352 Kg; da - Inner Ring Backing Diameter:47.200 mm; r - Outer Ring To Clear Radius3:1.0 mm; Cage Type:CR - Phenolic Outer; Ball Type:STEEL;
Komatsu COOLER 417-03-61131 AFTER COOLER	da min:180.2 mm; d2:191.8 mm; Max operating temperature, Tmax:200 °C; Nref:2,200 rpm; B:67 mm; Y2:4.58; ra max:2 mm; Characteristic inner ring frequency, BPFI:13.89 Hz; k:5 mm; Nlim:2,700 rpm;
Komatsu COOLER 21K-03-72161 AFTER COOLER	SW:3.97 mm; C:31.85 kN; Designation of housing:SP208-210/85-; L:320 mm; S:19 mm; G:R1/8"; s1:24.6 mm; T min.:-20 °C; H:120 mm; d:41.28 mm;