Komatsu COOLER 21K-03-72171 AFTER COOLER	SW:3.97 mm; C:31.85 kN; Designation of housing:SP208-210/85-; L:320 mm; S:19 mm; G:R1/8"; s1:24.6 mm; T min.:-20 °C; H:120 mm; d:41.28 mm;
Komatsu COOLER 425-03-51121 AFTER COOLER AS	Z:70.3 mm; S:10.2 mm; N:14mm; J:150 mm; d:44.45 mm; Designation of open end cover:SCOU209-28; s1:20.6 mm; C:31.85 kN; B:41.2 mm; A1:32 mm;
Komatsu COOLER 11Y-03-51130 AFTER COOLER	B:23.8 mm; A:32.1 mm; A2:45.7 mm; d1:44.1 mm; L:80 mm; S:9 mm; C0:11.2 kN; Weight:0.85 kg; Recommended tightening torque for set screw:8 Nm; J:116.5 mm;
Komatsu COOLER 418-03-31132 AFTER COOLER	Bearing Material:Stainless Steel; Housing Material:[Aluminum Alloy] 201; Bearing Retained:No; Bearing Used:Deep Groove Ball Bea; Number of Bearings:Double; Type:Bearings with Housin; Bearing I.D. d(mm):17;
Komatsu COOLER 6736-11-4212 AFTER COOLER	Pillow Type, Category:Standard; Surface Treatment:No; Rolling Element Material:Bearing Steel; Unit Body Material:Cast Iron; Basic Load Rating, Dynamic Rating(N):67400; Diameter series symbol:Used for Light load; Basic Load Rating, Static Rating(N):48300; B:82.6; Accessory:With steel plate cov;
Komatsu COOLER YM129A00-13400 COOLER	da min:180.2 mm; d2:191.8 mm; Max operating temperature, Tmax:200 °C; Nref:2,200 rpm; B:67 mm; Y2:4.58; ra max:2 mm; Characteristic inner ring frequency, BPFI:13.89 Hz; k:5 mm; Nlim:2,700 rpm;
Komatsu COOLER 6742-01-5005 AFTER COOLER AS	B:23.8 mm; A:32.1 mm; A2:45.7 mm; d1:44.1 mm; L:80 mm; S:9 mm; C0:11.2 kN; Weight:0.85 kg; Recommended tightening torque for set screw:8 Nm; J:116.5 mm;
Komatsu COOLER 6261-81-7200 COOLER ASS'Y	Radial clearance class:CN; Mass:0.2 kg; Nlim:18,000 rpm; Dynamic load, C:19.2 kN; f0:13.8; ra max:1 mm; d:30 mm; Min operating temperature, Tmin:-40 °C; Characteristic rolling element frequency, BSF:4.68 Hz; Da max:57 mm;