Komatsu COOLER YM129A00-13400 COOLER	da min:180.2 mm; d2:191.8 mm; Max operating temperature, Tmax:200 °C; Nref:2,200 rpm; B:67 mm; Y2:4.58; ra max:2 mm; Characteristic inner ring frequency, BPFI:13.89 Hz; k:5 mm; Nlim:2,700 rpm;
Komatsu COOLER 14X-03-51121 AFTER COOLER AS	Pillow Type, Category:Standard; Surface Treatment:No; Rolling Element Material:Bearing Steel; Unit Body Material:Cast Iron; Basic Load Rating, Dynamic Rating(N):67400; Diameter series symbol:Used for Light load; Basic Load Rating, Static Rating(N):48300; B:82.6; Accessory:With steel plate cov;
Komatsu COOLER 14X-03-51141 COOLER	Z:70.3 mm; S:10.2 mm; N:14mm; J:150 mm; d:44.45 mm; Designation of open end cover:SCOU209-28; s1:20.6 mm; C:31.85 kN; B:41.2 mm; A1:32 mm;
Komatsu COOLER 203-03-12161 AFTER COOLER	Type:Bearings with Housin; Volume Discount:Available; Flange O.D. H(φ):81; Bearing Material:[Steel] Steel; Shape:Flanged Pilot Type; Width T(mm):70; Bearing Used:Deep Groove Ball Bea; Number of Bearings:Double;
Komatsu COOLER 56D-03-21110 COOLER	Z:70.3 mm; S:10.2 mm; N:14mm; J:150 mm; d:44.45 mm; Designation of open end cover:SCOU209-28; s1:20.6 mm; C:31.85 kN; B:41.2 mm; A1:32 mm;
Komatsu COOLER 22P-03-11121 AFTER COOLER AS	B:23.8 mm; A:32.1 mm; A2:45.7 mm; d1:44.1 mm; L:80 mm; S:9 mm; C0:11.2 kN; Weight:0.85 kg; Recommended tightening torque for set screw:8 Nm; J:116.5 mm;
Komatsu COOLER 423-03-D1611CL COOLER TC OIL	Plummer Block Type:Cutting in Two; Unit Body Material:Gray Cast Iron (FC 2; Width w(mm):240; Bearing Inner Dia. Shape:Cylindrical Bore; Width a(mm):410; Days to Ship:9 Days; Length b(mm):120; Unit, Type:Plummer Block; Shaft diameter(φ):100;
Komatsu COOLER 20Y-03-46170 AFTER COOLER	Plummer Block Type:Cutting in Two; Unit Body Material:Gray Cast Iron (FC 2; Width w(mm):240; Bearing Inner Dia. Shape:Cylindrical Bore; Width a(mm):410; Days to Ship:9 Days; Length b(mm):120; Unit, Type:Plummer Block; Shaft diameter(φ):100;