Komatsu COOLER 14X-03-51141 COOLER	Z:70.3 mm; S:10.2 mm; N:14mm; J:150 mm; d:44.45 mm; Designation of open end cover:SCOU209-28; s1:20.6 mm; C:31.85 kN; B:41.2 mm; A1:32 mm;
Komatsu COOLER 124-62-51490 COOLER	Plummer Block Type:Cutting in Two; Unit Body Material:Gray Cast Iron (FC 2; Width w(mm):240; Bearing Inner Dia. Shape:Cylindrical Bore; Width a(mm):410; Days to Ship:9 Days; Length b(mm):120; Unit, Type:Plummer Block; Shaft diameter(φ):100;
Komatsu COOLER 421-03-31322 COOLER	Radial clearance class:CN; Mass:0.2 kg; Nlim:18,000 rpm; Dynamic load, C:19.2 kN; f0:13.8; ra max:1 mm; d:30 mm; Min operating temperature, Tmin:-40 °C; Characteristic rolling element frequency, BSF:4.68 Hz; Da max:57 mm;
Komatsu COOLER 22P-03-11121 AFTER COOLER AS	B:23.8 mm; A:32.1 mm; A2:45.7 mm; d1:44.1 mm; L:80 mm; S:9 mm; C0:11.2 kN; Weight:0.85 kg; Recommended tightening torque for set screw:8 Nm; J:116.5 mm;
Komatsu COOLER 21K-03-41141 AFTER COOLER	SW:3.97 mm; C:31.85 kN; Designation of housing:SP208-210/85-; L:320 mm; S:19 mm; G:R1/8"; s1:24.6 mm; T min.:-20 °C; H:120 mm; d:41.28 mm;
Komatsu COOLER 424-03-41121 AFTER COOLER AS	Bearing Material:Stainless Steel; Housing Material:[Aluminum Alloy] 201; Bearing Retained:No; Bearing Used:Deep Groove Ball Bea; Number of Bearings:Double; Type:Bearings with Housin; Bearing I.D. d(mm):17;
Komatsu COOLER 11Y-03-52130 AFTER COOLER	da min:180.2 mm; d2:191.8 mm; Max operating temperature, Tmax:200 °C; Nref:2,200 rpm; B:67 mm; Y2:4.58; ra max:2 mm; Characteristic inner ring frequency, BPFI:13.89 Hz; k:5 mm; Nlim:2,700 rpm;
Komatsu COOLER 421-03-44150CL AFTER COOLER	N:11,5mm; T min.:-20 °C; s1:13.5 mm; A:29.3 mm; B:27 mm; A1:11 mm; d:25 mm; Designation of closed end cover:SCC205; Weight:0.61 kg; Designation of bearing:US205G2T20;