HVPVC-F40-A5 TAIWAN YEESEN Oil Pump v Series	Roller Follower Type:Separate; RoHS:6; Roller Guiding Method:Retainer Type; Category:Roller Follower; Inner Ring:Provided; Shaft:None; Basic Load Rating Cr (Dynamic)(kN):5.68; Allowable Rotational Speed(rpm):17000; Roller Lining:None; Unit:Metric Series;
VD2-40F-A3 TAIWAN YEESEN Oil Pump v Series	Roller Follower Type:Separate; RoHS:6; Roller Guiding Method:Retainer Type; Category:Roller Follower; Inner Ring:Provided; Shaft:None; Basic Load Rating Cr (Dynamic)(kN):5.68; Allowable Rotational Speed(rpm):17000; Roller Lining:None; Unit:Metric Series;
VDC-1A-F30D-20 TAIWAN YEESEN Oil Pump v Series	Locknut:KML24; L1:72.00 mm; Lockwasher and Lockplates:MBL24; C:22 mm; Weight:2.0 Kg; G:M120x2; d1:4 1/4 in; Appropriate Hydraulic Nut:HMV24; D3:145 mm;
VDC-1A-F40D-20 TAIWAN YEESEN Oil Pump v Series	Recommended tightening torque for set screw:3.7 Nm; G:M6x1; T max.:100 °C; T min.:-20 °C; H1:15 mm; Weight:1.45 kg; J:132 mm; L1:54 mm; L:175 mm; N1:20 mm;
HVPVC-F30-A5 TAIWAN YEESEN Oil Pump v Series	SW:3.97 mm; A3:2 mm; d:47.62 mm; A:31 mm; Recommended tightening torque for set screw:8 Nm; d1:67.2 mm; B:30.2 mm; S:11 mm; T min.:-20 °C; Designation of housing:C210-;
VDC-F40-D TAIWAN YEESEN Oil Pump v Series	f0:14.8; Min operating temperature, Tmin:-25 °C; Fatigue limit load, Cu:0.47 kN; Max operating temperature, Tmax:110 °C; Mass:0.16 kg; Characteristic inner ring frequency, BPFI:6.4 Hz; da min:40 mm; ra max:1 mm; Characteristic outer ring frequency, BPF0:4.6 Hz; Brand:NTN;
VDC-F30-C TAIWAN YEESEN Oil Pump v Series	Recommended tightening torque for set screw:3.7 Nm; G:M6x1; T max.:100 °C; T min.:-20 °C; H1:15 mm; Weight:1.45 kg; J:132 mm; L1:54 mm; L:175 mm; N1:20 mm;
VDV-1A-F40D-35 TAIWAN YEESEN Oil Pump v Series	Volume Discount:Available; Type:Bearings with Housin; Flange Shape:Square Type; Shape:Flanged Pilot Type; Housing Material:[Aluminum Alloy] 201; Flange O.D. H(φ):72; Number of Bearings:Double; Holder Surface Treatment:Clear Anodize; Bearing Retained:No; Width T(mm):70;