MARZOCCHI GHPA3A-S-60-S1-D+GHPP3-S-30-D GHP Series Gear Pump	a - Effective Center Location4:-0.18 in; da - Cone Frontface Backing Diameter:2.95 in; C1 - Dynamic Radial Rating (1 million revolutions)6:31200 lbf; Cage Type:Stamped Steel; Design Units:Imperial; C0 - Static Radial Rating:43000 lbf; Cone Part Number:3994; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:54300 lbf; Series:3900; db - Cone Backface Backing Diameter:3.39 in;
MARZOCCHI GHPA2-D10+GHPI2-DS10+GHPP2-D10 GHP Series Gear Pump	Rolling Element Material:Steel; Precision (JIS):Grade 0; Width(mm):64; Raceway Ring Shape:Tapered Roller; Inner/Outer Ring Material:Steel; Retainer Type:Punching; Size Standards:Metric System; Basic Load Rating, Dynamic Rating(N):269000;
MARZOCCHI GHP2BK1-D-9 GHP Series Gear Pump	Shape:Flange Type; Flange Shape:Round Type; Flange O.D. H(φ):77; Type:Bearings with Housin; Number of Bearings:Double; Bearing Used:Deep Groove Ball Bea; Housing Material:1045 Carbon Steel; Holder Surface Treatment:Black Oxide Coating; Days to Ship:8 Days;
MARZOCCHI GHPA3-D-94 GHP Series Gear Pump	Number of Bearings:Single; Seals:VV (Non-Contact Rubb; Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea; Volume Discount:Available; Shape:Flange Type; Width T(mm):7.5; Flange O.D. H(φ):50; Housing Material:304 Stainless Steel; Bearing Part Number:6803;
MARZOCCHI GHP3BK1-D-33 GHP Series Gear Pump	Dz:110 mm; Designation of open end cover:SCOU211-32; C:43.55 kN; A1:34 mm; S:22.2 mm; T max.:200 °C; J:100 mm; s1:27.8 mm; H:63.5 mm; H1:25 mm;
MARZOCCHI GHP1-D-11 GHP Series Gear Pump	A5:39.7 mm; P:300 mm; d:57.15 mm; T min.:-20 °C; Designation of bearing:UC212-36G2T20; S:25.4 mm; s1:32.55 mm; Weight:1.67 kg; C0:32.8 kN; C:52.5 kN;
MARZOCCHI GHP2BK1-D-10-T4-T GHP Series Gear Pump	Volume Discount:Available; Bearing Used:Deep Groove Ball Bea; Bearing Part Number:6904; Bearing Retained:No; Flange O.D. H(φ):69; Number of Bearings:Double;
MARZOCCHI GHP3BK1-D-40 GHP Series Gear Pump	SW:3 mm; m:5.5 mm; G:M6x1; C1:4.3 mm; S:7.5 mm; D:52 mm; T max.:100 °C; Recommended tightening torque for set screw:5.5 Nm; B:27 mm; Weight:0.17 kg;