TOYOOKI HVP-VCC1-L26-26A2A3-B HVP Vane pump	Axial rigidity:291 N/µm; Characteristic outer ring frequency, BPF0:12.34 Hz; Radial rigidity:628 N/µm; Min operating temperature, Tmin:-30 °C; Dynamic load, C:63.5 kN; f0:16.74; Characteristic cage frequency, FTF:0.46 Hz; Fatigue limit load, Cu:3.5 kN; Characteristic inner ring frequency, BPFI:14.66 Hz; D1:150.65 mm;
TOYOOKI HVP-VD1-F45A1-B HVP Vane pump	B:37.6 mm; d1:51.1 mm; J:110 mm; T min.:-40 °C; d:35 mm; L:135 mm; Designation of housing:FCE207-; e:1 mm; Weight:1.4 kg; B1:51.1 mm;
TOYOOKI HVP-FCE1-L17-75R-A HVP Vane pump	C90 - Dynamic Radial Rating (90 million revolutions)4:23500 lbf; Da - Cup Frontface Backing Diameter:6.36 in; Design Units:Imperial; Cage Type:Stamped Steel; Y - ISO Factor9:1.63; C1 - Dynamic Radial Rating (1 million revolutions)5:90500 lbf; G2 - Heat Generation Factor (Rib-Roller End):37.7; C - Cup Width:1.5000 in; Bearing Weight:10.4 lb; Aa - Cage-Cone Backface Clearance:0.11 in;
TOYOOKI HVP-VD1-30-30F-A2A2 HVP Vane pump	s1:39.7 mm; H2:107 mm; G:R1/8"; H:53.9 mm; N:M12; A:48 mm; B:42.8 mm; Weight:2.07 kg; L:120 mm; T max.:100 °C;
TOYOOKI HVP-VCC1-F26-26A3A3-B HVP Vane pump	N:19mm; Designation of closed end cover:SCC212; L:175 mm; Designation of bearing:UC212G2L3; C0:32.8 kN; Designation of housing:F212N-; G:M6x1; A2:68.7 mm; e:29 mm; d:60 mm;
TOYOOKI HVP-VCC1-L26-26A1A3-B HVP Vane pump	Designation of open end cover:SCOE204-15; S:17 mm; L:60 mm; H:102 mm; A1:12 mm; Z:46.2 mm; s1:30.5 mm; C:12.8 kN; Recommended tightening torque for set screw:5.5 Nm; B1:43.5 mm;
TOYOOKI HVP-VCC1-L26-26A2A2-B HVP Vane pump	Recommended tightening torque for set screw:33 Nm; G:M12x1,25; C:37 mm; S:24.5 mm; d1:120 mm; m:9.5 mm; C0:71.5 kN; SW:6 mm; d:90 mm; Weight:4.9 kg;
TOYOOKI HVP-FCE1-L17-60R-A HVP Vane pump	C0:7.88 kN; N2:32 mm; s1:30.9 mm; B:34.8 mm; C:14 kN; Designation of housing:T205-; B1:44.3 mm; Recommended tightening torque for set screw:3.7 Nm; T min.:-20 °C; L2:10 mm;