TOYOOKI HVP-FCE1-L8-85R-A HVP Vane pump	Recommended tightening torque for set screw:33 Nm; G:M12x1,25; C:37 mm; S:24.5 mm; d1:120 mm; m:9.5 mm; C0:71.5 kN; SW:6 mm; d:90 mm; Weight:4.9 kg;
TOYOOKI HVP-FCC1-F36-17R-A HVP Vane pump	C90 - Dynamic Radial Rating (90 million revolutions)4:23500 lbf; Da - Cup Frontface Backing Diameter:6.36 in; Design Units:Imperial; Cage Type:Stamped Steel; Y - ISO Factor9:1.63; C1 - Dynamic Radial Rating (1 million revolutions)5:90500 lbf; G2 - Heat Generation Factor (Rib-Roller End):37.7; C - Cup Width:1.5000 in; Bearing Weight:10.4 lb; Aa - Cage-Cone Backface Clearance:0.11 in;
TOYOOKI HVP-FCE1-L17-85R-A HVP Vane pump	Dimension P:0.9 in; Dimension D:9.0 in; Maximum Speed:3310 rpm; Dimension B:6.0 in; Bearing Number:LSM75BR; Bearing - Housing - Seal:LSM75BRHATL; Cor - Static Load Rating:36194 lbf; Bearing - Housing - Seal UPC:013992042064; Tensioning Unit Type:Push Type; Note:This product line wa;
TOYOOKI HVP-FA1-*2R-A HVP Vane pump	Axial rigidity:291 N/µm; Characteristic outer ring frequency, BPF0:12.34 Hz; Radial rigidity:628 N/µm; Min operating temperature, Tmin:-30 °C; Dynamic load, C:63.5 kN; f0:16.74; Characteristic cage frequency, FTF:0.46 Hz; Fatigue limit load, Cu:3.5 kN; Characteristic inner ring frequency, BPFI:14.66 Hz; D1:150.65 mm;
TOYOOKI HVP-FE1-F60R-A HVP Vane pump	Recommended tightening torque for set screw:33 Nm; G:M12x1,25; C:37 mm; S:24.5 mm; d1:120 mm; m:9.5 mm; C0:71.5 kN; SW:6 mm; d:90 mm; Weight:4.9 kg;
TOYOOKI HVP-FE1-F50R-A HVP Vane pump	B:37.6 mm; d1:51.1 mm; J:110 mm; T min.:-40 °C; d:35 mm; L:135 mm; Designation of housing:FCE207-; e:1 mm; Weight:1.4 kg; B1:51.1 mm;
TOYOOKI HVP-FCE1-L17-108R-A HVP Vane pump	Recommended tightening torque for set screw:33 Nm; G:M12x1,25; C:37 mm; S:24.5 mm; d1:120 mm; m:9.5 mm; C0:71.5 kN; SW:6 mm; d:90 mm; Weight:4.9 kg;
TOYOOKI HVP-VC1-F26A3-B HVP Vane pump	Recommended tightening torque for set screw:33 Nm; G:M12x1,25; C:37 mm; S:24.5 mm; d1:120 mm; m:9.5 mm; C0:71.5 kN; SW:6 mm; d:90 mm; Weight:4.9 kg;