TOYOOKI HVP-FE1-F95R-A HVP Vane pump | Type:Lock Nuts; Screw Type:Metric (Fine) Thread; Thread Nominal M(mm):M50×1.5; Shape:Round Shape; Surface Treatment:Surface Treatment Pr; Material:[Steel] 1018 Carbon; Volume Discount:Available; |
TOYOOKI HVP-VF1-L90A1-B HVP Vane pump | Series:HH234000; C1 - Dynamic Radial Rating (1 million revolutions)5:274000 lbf; G2 - Heat Generation Factor (Rib-Roller End):62.1; Y - ISO Factor9:1.84; Cage Type:Pin-Type; a - Effective Center Location3:-26.4 mm; Cg - Geometry Factor:0.116; Db - Cup Backface Backing Diameter:276.10 mm; r - Cup Backface To Clear Radius2:6.86 mm; K - Factor7:1.79; |
TOYOOKI HVP-FCE1-L21-50R-A HVP Vane pump | Aa - Cage-Cone Backface Clearance:0.8 mm; Cup Part Number:15245; Ab - Cage-Cone Frontface Clearance:1.8 mm; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2090 lbf; Y - ISO Factor9:1.71; Cg - Geometry Factor:0.0606; D:61.999 mm; R - Cone Backface To Clear Radius1:0.760 mm; Bearing Weight:0.30 Kg; a - Effective Center Location3:-5.8 mm; |
TOYOOKI HVP-FE1-F60R-A HVP Vane pump | Recommended tightening torque for set screw:33 Nm; G:M12x1,25; C:37 mm; S:24.5 mm; d1:120 mm; m:9.5 mm; C0:71.5 kN; SW:6 mm; d:90 mm; Weight:4.9 kg; |
TOYOOKI HVP-FC2-L17R-A HVP Vane pump | Axial rigidity:291 N/µm; Characteristic outer ring frequency, BPF0:12.34 Hz; Radial rigidity:628 N/µm; Min operating temperature, Tmin:-30 °C; Dynamic load, C:63.5 kN; f0:16.74; Characteristic cage frequency, FTF:0.46 Hz; Fatigue limit load, Cu:3.5 kN; Characteristic inner ring frequency, BPFI:14.66 Hz; D1:150.65 mm; |
TOYOOKI HVP-FC1-L5R-A HVP Vane pump | B:37.6 mm; d1:51.1 mm; J:110 mm; T min.:-40 °C; d:35 mm; L:135 mm; Designation of housing:FCE207-; e:1 mm; Weight:1.4 kg; B1:51.1 mm; |
TOYOOKI HVP-VD1-G45A3-B HVP Vane pump | Aa - Cage-Cone Backface Clearance:0.8 mm; Cup Part Number:15245; Ab - Cage-Cone Frontface Clearance:1.8 mm; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2090 lbf; Y - ISO Factor9:1.71; Cg - Geometry Factor:0.0606; D:61.999 mm; R - Cone Backface To Clear Radius1:0.760 mm; Bearing Weight:0.30 Kg; a - Effective Center Location3:-5.8 mm; |
TOYOOKI HVP-VG1-G160A3-B HVP Vane pump | H:113 mm; Weight:0.45 kg; A:25.5 mm; S:7.5 mm; T min.:-20 °C; B1:30.9 mm; G:M6x1; d:20 mm; s1:24.2 mm; A1:11 mm; |