TOYOOKI HVP-FC1-L17R-A HVP Vane pump	Recommended tightening torque for set screw:33 Nm; G:M12x1,25; C:37 mm; S:24.5 mm; d1:120 mm; m:9.5 mm; C0:71.5 kN; SW:6 mm; d:90 mm; Weight:4.9 kg;
TOYOOKI HVP-FCE1-L17-120R-A HVP Vane pump	Dimension P:0.9 in; Dimension D:9.0 in; Maximum Speed:3310 rpm; Dimension B:6.0 in; Bearing Number:LSM75BR; Bearing - Housing - Seal:LSM75BRHATL; Cor - Static Load Rating:36194 lbf; Bearing - Housing - Seal UPC:013992042064; Tensioning Unit Type:Push Type; Note:This product line wa;
TOYOOKI HVP-FE1-L50R-A HVP Vane pump	C0:7.88 kN; N2:32 mm; s1:30.9 mm; B:34.8 mm; C:14 kN; Designation of housing:T205-; B1:44.3 mm; Recommended tightening torque for set screw:3.7 Nm; T min.:-20 °C; L2:10 mm;
TOYOOKI HVP-FCE1-L14-60R-A HVP Vane pump	Dimension P:0.9 in; Dimension D:9.0 in; Maximum Speed:3310 rpm; Dimension B:6.0 in; Bearing Number:LSM75BR; Bearing - Housing - Seal:LSM75BRHATL; Cor - Static Load Rating:36194 lbf; Bearing - Housing - Seal UPC:013992042064; Tensioning Unit Type:Push Type; Note:This product line wa;
TOYOOKI HVP-VCC1-L26-26A1A3-B HVP Vane pump	Designation of open end cover:SCOE204-15; S:17 mm; L:60 mm; H:102 mm; A1:12 mm; Z:46.2 mm; s1:30.5 mm; C:12.8 kN; Recommended tightening torque for set screw:5.5 Nm; B1:43.5 mm;
TOYOOKI HVP-FCE1-L21-75R-A HVP Vane pump	G2 - Heat Generation Factor (Rib-Roller End):166; B - Double Cone Width:6.5000 in; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:660000 lbf; G1 - Heat Generation Factor (Roller-Raceway)8:2180; Cone Part Number:EE724121D; C0 - Static Radial Rating:573000 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:171000 lbf; Cage Type:Stamped Steel; da - Cone Frontface Backing Diameter:13.15 in;
TOYOOKI HVP-VG1-G160A3-B HVP Vane pump	H:113 mm; Weight:0.45 kg; A:25.5 mm; S:7.5 mm; T min.:-20 °C; B1:30.9 mm; G:M6x1; d:20 mm; s1:24.2 mm; A1:11 mm;
TOYOOKI HVP-VD1-F45A3-B HVP Vane pump	C0:7.88 kN; N2:32 mm; s1:30.9 mm; B:34.8 mm; C:14 kN; Designation of housing:T205-; B1:44.3 mm; Recommended tightening torque for set screw:3.7 Nm; T min.:-20 °C; L2:10 mm;