| TOYOOKI HVP-VG1-G160A2-B HVP Vane pump | Designation of open end cover:SCOE204-15; S:17 mm; L:60 mm; H:102 mm; A1:12 mm; Z:46.2 mm; s1:30.5 mm; C:12.8 kN; Recommended tightening torque for set screw:5.5 Nm; B1:43.5 mm; |
| TOYOOKI HVP-FE1-F60R-A HVP Vane pump | Recommended tightening torque for set screw:33 Nm; G:M12x1,25; C:37 mm; S:24.5 mm; d1:120 mm; m:9.5 mm; C0:71.5 kN; SW:6 mm; d:90 mm; Weight:4.9 kg; |
| TOYOOKI HVP-FC1-L32R-A HVP Vane pump | Series:HH234000; C1 - Dynamic Radial Rating (1 million revolutions)5:274000 lbf; G2 - Heat Generation Factor (Rib-Roller End):62.1; Y - ISO Factor9:1.84; Cage Type:Pin-Type; a - Effective Center Location3:-26.4 mm; Cg - Geometry Factor:0.116; Db - Cup Backface Backing Diameter:276.10 mm; r - Cup Backface To Clear Radius2:6.86 mm; K - Factor7:1.79; |
| TOYOOKI HVP-VC1-F26A2-B HVP Vane pump | Series:HH234000; C1 - Dynamic Radial Rating (1 million revolutions)5:274000 lbf; G2 - Heat Generation Factor (Rib-Roller End):62.1; Y - ISO Factor9:1.84; Cage Type:Pin-Type; a - Effective Center Location3:-26.4 mm; Cg - Geometry Factor:0.116; Db - Cup Backface Backing Diameter:276.10 mm; r - Cup Backface To Clear Radius2:6.86 mm; K - Factor7:1.79; |
| TOYOOKI HVP-FCE1-L5-108R-A HVP Vane pump | H:113 mm; Weight:0.45 kg; A:25.5 mm; S:7.5 mm; T min.:-20 °C; B1:30.9 mm; G:M6x1; d:20 mm; s1:24.2 mm; A1:11 mm; |
| TOYOOKI HVP-FA1-*2R-A HVP Vane pump | Axial rigidity:291 N/µm; Characteristic outer ring frequency, BPF0:12.34 Hz; Radial rigidity:628 N/µm; Min operating temperature, Tmin:-30 °C; Dynamic load, C:63.5 kN; f0:16.74; Characteristic cage frequency, FTF:0.46 Hz; Fatigue limit load, Cu:3.5 kN; Characteristic inner ring frequency, BPFI:14.66 Hz; D1:150.65 mm; |
| TOYOOKI HVP-VCC1-F26-26A2A2-B HVP Vane pump | Type:Lock Nuts; Screw Type:Metric (Fine) Thread; Thread Nominal M(mm):M50×1.5; Shape:Round Shape; Surface Treatment:Surface Treatment Pr; Material:[Steel] 1018 Carbon; Volume Discount:Available; |
| TOYOOKI HVP-FE1-L95R-A HVP Vane pump | Axial rigidity:291 N/µm; Characteristic outer ring frequency, BPF0:12.34 Hz; Radial rigidity:628 N/µm; Min operating temperature, Tmin:-30 °C; Dynamic load, C:63.5 kN; f0:16.74; Characteristic cage frequency, FTF:0.46 Hz; Fatigue limit load, Cu:3.5 kN; Characteristic inner ring frequency, BPFI:14.66 Hz; D1:150.65 mm; |