TOYOOKI HVP-VC1-F26A3-B HVP Vane pump	Recommended tightening torque for set screw:33 Nm; G:M12x1,25; C:37 mm; S:24.5 mm; d1:120 mm; m:9.5 mm; C0:71.5 kN; SW:6 mm; d:90 mm; Weight:4.9 kg;
TOYOOKI HVP-FCE1-L21-50R-A HVP Vane pump	Aa - Cage-Cone Backface Clearance:0.8 mm; Cup Part Number:15245; Ab - Cage-Cone Frontface Clearance:1.8 mm; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2090 lbf; Y - ISO Factor9:1.71; Cg - Geometry Factor:0.0606; D:61.999 mm; R - Cone Backface To Clear Radius1:0.760 mm; Bearing Weight:0.30 Kg; a - Effective Center Location3:-5.8 mm;
TOYOOKI HVP-FC1-F11R-A HVP Vane pump	Designation of housing:PLE207N-; Weight:1.43 kg; B:42.9 mm; Designation of bearing:UC207-20G2L3; L:166 mm; d:31.75 mm; N:14mm; G:M6x1; H2:91.5 mm; N1:21.5 mm;
TOYOOKI HVP-FCE1-L14-85R-A HVP Vane pump	Aa - Cage-Cone Backface Clearance:0.8 mm; Cup Part Number:15245; Ab - Cage-Cone Frontface Clearance:1.8 mm; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2090 lbf; Y - ISO Factor9:1.71; Cg - Geometry Factor:0.0606; D:61.999 mm; R - Cone Backface To Clear Radius1:0.760 mm; Bearing Weight:0.30 Kg; a - Effective Center Location3:-5.8 mm;
TOYOOKI HVP-FCE1-L17-50R-A HVP Vane pump	Axial rigidity:291 N/µm; Characteristic outer ring frequency, BPF0:12.34 Hz; Radial rigidity:628 N/µm; Min operating temperature, Tmin:-30 °C; Dynamic load, C:63.5 kN; f0:16.74; Characteristic cage frequency, FTF:0.46 Hz; Fatigue limit load, Cu:3.5 kN; Characteristic inner ring frequency, BPFI:14.66 Hz; D1:150.65 mm;
TOYOOKI HVP-VG1-G125A3-B HVP Vane pump	Dimension P:0.9 in; Dimension D:9.0 in; Maximum Speed:3310 rpm; Dimension B:6.0 in; Bearing Number:LSM75BR; Bearing - Housing - Seal:LSM75BRHATL; Cor - Static Load Rating:36194 lbf; Bearing - Housing - Seal UPC:013992042064; Tensioning Unit Type:Push Type; Note:This product line wa;
TOYOOKI HVP-FCE1-L5-108R-A HVP Vane pump	H:113 mm; Weight:0.45 kg; A:25.5 mm; S:7.5 mm; T min.:-20 °C; B1:30.9 mm; G:M6x1; d:20 mm; s1:24.2 mm; A1:11 mm;
TOYOOKI HVP-FC1-F21R-A HVP Vane pump	Type:Lock Nuts; Screw Type:Metric (Fine) Thread; Thread Nominal M(mm):M50×1.5; Shape:Round Shape; Surface Treatment:Surface Treatment Pr; Material:[Steel] 1018 Carbon; Volume Discount:Available;