TOYOOKI HVP-FCE1-L21-60R-A HVP Vane pump	Aa - Cage-Cone Backface Clearance:0.8 mm; Cup Part Number:15245; Ab - Cage-Cone Frontface Clearance:1.8 mm; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2090 lbf; Y - ISO Factor9:1.71; Cg - Geometry Factor:0.0606; D:61.999 mm; R - Cone Backface To Clear Radius1:0.760 mm; Bearing Weight:0.30 Kg; a - Effective Center Location3:-5.8 mm;
TOYOOKI HVP-FCE1-L21-75R-A HVP Vane pump	G2 - Heat Generation Factor (Rib-Roller End):166; B - Double Cone Width:6.5000 in; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:660000 lbf; G1 - Heat Generation Factor (Roller-Raceway)8:2180; Cone Part Number:EE724121D; C0 - Static Radial Rating:573000 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:171000 lbf; Cage Type:Stamped Steel; da - Cone Frontface Backing Diameter:13.15 in;
TOYOOKI HVP-FC1-L32R-A HVP Vane pump	Series:HH234000; C1 - Dynamic Radial Rating (1 million revolutions)5:274000 lbf; G2 - Heat Generation Factor (Rib-Roller End):62.1; Y - ISO Factor9:1.84; Cage Type:Pin-Type; a - Effective Center Location3:-26.4 mm; Cg - Geometry Factor:0.116; Db - Cup Backface Backing Diameter:276.10 mm; r - Cup Backface To Clear Radius2:6.86 mm; K - Factor7:1.79;
TOYOOKI HVP-FCE1-L8-85R-A HVP Vane pump	Recommended tightening torque for set screw:33 Nm; G:M12x1,25; C:37 mm; S:24.5 mm; d1:120 mm; m:9.5 mm; C0:71.5 kN; SW:6 mm; d:90 mm; Weight:4.9 kg;
TOYOOKI HVP-FC2-L17R-A HVP Vane pump	Axial rigidity:291 N/µm; Characteristic outer ring frequency, BPF0:12.34 Hz; Radial rigidity:628 N/µm; Min operating temperature, Tmin:-30 °C; Dynamic load, C:63.5 kN; f0:16.74; Characteristic cage frequency, FTF:0.46 Hz; Fatigue limit load, Cu:3.5 kN; Characteristic inner ring frequency, BPFI:14.66 Hz; D1:150.65 mm;
TOYOOKI HVP-VG1-G125A3-B HVP Vane pump	Dimension P:0.9 in; Dimension D:9.0 in; Maximum Speed:3310 rpm; Dimension B:6.0 in; Bearing Number:LSM75BR; Bearing - Housing - Seal:LSM75BRHATL; Cor - Static Load Rating:36194 lbf; Bearing - Housing - Seal UPC:013992042064; Tensioning Unit Type:Push Type; Note:This product line wa;
TOYOOKI HVP-FCC1-F36-5R-A HVP Vane pump	s1:39.7 mm; H2:107 mm; G:R1/8"; H:53.9 mm; N:M12; A:48 mm; B:42.8 mm; Weight:2.07 kg; L:120 mm; T max.:100 °C;
TOYOOKI HVP-FA1-*2R-A HVP Vane pump	Axial rigidity:291 N/µm; Characteristic outer ring frequency, BPF0:12.34 Hz; Radial rigidity:628 N/µm; Min operating temperature, Tmin:-30 °C; Dynamic load, C:63.5 kN; f0:16.74; Characteristic cage frequency, FTF:0.46 Hz; Fatigue limit load, Cu:3.5 kN; Characteristic inner ring frequency, BPFI:14.66 Hz; D1:150.65 mm;