TOYOOKI HVP-VCC1-F26-26A2A2-B HVP Vane pump	Type:Lock Nuts; Screw Type:Metric (Fine) Thread; Thread Nominal M(mm):M50×1.5; Shape:Round Shape; Surface Treatment:Surface Treatment Pr; Material:[Steel] 1018 Carbon; Volume Discount:Available;
TOYOOKI HVP-FE1-F120R-A HVP Vane pump	Series:HH234000; C1 - Dynamic Radial Rating (1 million revolutions)5:274000 lbf; G2 - Heat Generation Factor (Rib-Roller End):62.1; Y - ISO Factor9:1.84; Cage Type:Pin-Type; a - Effective Center Location3:-26.4 mm; Cg - Geometry Factor:0.116; Db - Cup Backface Backing Diameter:276.10 mm; r - Cup Backface To Clear Radius2:6.86 mm; K - Factor7:1.79;
TOYOOKI HVP-VD1-30-30F-A2A2 HVP Vane pump	s1:39.7 mm; H2:107 mm; G:R1/8"; H:53.9 mm; N:M12; A:48 mm; B:42.8 mm; Weight:2.07 kg; L:120 mm; T max.:100 °C;
TOYOOKI HVP-VF1-L56A1-B HVP Vane pump	s1:39.7 mm; H2:107 mm; G:R1/8"; H:53.9 mm; N:M12; A:48 mm; B:42.8 mm; Weight:2.07 kg; L:120 mm; T max.:100 °C;
TOYOOKI HVP-FC1-F39R-A HVP Vane pump	s1:39.7 mm; H2:107 mm; G:R1/8"; H:53.9 mm; N:M12; A:48 mm; B:42.8 mm; Weight:2.07 kg; L:120 mm; T max.:100 °C;
TOYOOKI HVP-FCE1-L21-75R-A HVP Vane pump	G2 - Heat Generation Factor (Rib-Roller End):166; B - Double Cone Width:6.5000 in; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:660000 lbf; G1 - Heat Generation Factor (Roller-Raceway)8:2180; Cone Part Number:EE724121D; C0 - Static Radial Rating:573000 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:171000 lbf; Cage Type:Stamped Steel; da - Cone Frontface Backing Diameter:13.15 in;
TOYOOKI HVP-FCE1-L5-50R-A HVP Vane pump	Axial rigidity:291 N/µm; Characteristic outer ring frequency, BPF0:12.34 Hz; Radial rigidity:628 N/µm; Min operating temperature, Tmin:-30 °C; Dynamic load, C:63.5 kN; f0:16.74; Characteristic cage frequency, FTF:0.46 Hz; Fatigue limit load, Cu:3.5 kN; Characteristic inner ring frequency, BPFI:14.66 Hz; D1:150.65 mm;
TOYOOKI HVP-VCC1-L26-26A1A2-B HVP Vane pump	C0:7.88 kN; N2:32 mm; s1:30.9 mm; B:34.8 mm; C:14 kN; Designation of housing:T205-; B1:44.3 mm; Recommended tightening torque for set screw:3.7 Nm; T min.:-20 °C; L2:10 mm;