TOYOOKI HVP-FCE1-L17-75R-A HVP Vane pump	C90 - Dynamic Radial Rating (90 million revolutions)4:23500 lbf; Da - Cup Frontface Backing Diameter:6.36 in; Design Units:Imperial; Cage Type:Stamped Steel; Y - ISO Factor9:1.63; C1 - Dynamic Radial Rating (1 million revolutions)5:90500 lbf; G2 - Heat Generation Factor (Rib-Roller End):37.7; C - Cup Width:1.5000 in; Bearing Weight:10.4 lb; Aa - Cage-Cone Backface Clearance:0.11 in;
TOYOOKI HVP-FC1-L26R-A HVP Vane pump	Axial rigidity:291 N/µm; Characteristic outer ring frequency, BPF0:12.34 Hz; Radial rigidity:628 N/µm; Min operating temperature, Tmin:-30 °C; Dynamic load, C:63.5 kN; f0:16.74; Characteristic cage frequency, FTF:0.46 Hz; Fatigue limit load, Cu:3.5 kN; Characteristic inner ring frequency, BPFI:14.66 Hz; D1:150.65 mm;
TOYOOKI HVP-FCE1-L14-75R-A HVP Vane pump	N:19mm; Designation of closed end cover:SCC212; L:175 mm; Designation of bearing:UC212G2L3; C0:32.8 kN; Designation of housing:F212N-; G:M6x1; A2:68.7 mm; e:29 mm; d:60 mm;
TOYOOKI HVP-FCE1-L11-60R-A HVP Vane pump	Designation of open end cover:SCOE204-15; S:17 mm; L:60 mm; H:102 mm; A1:12 mm; Z:46.2 mm; s1:30.5 mm; C:12.8 kN; Recommended tightening torque for set screw:5.5 Nm; B1:43.5 mm;
TOYOOKI HVP-VCC1-F26-26A3A3-B HVP Vane pump	N:19mm; Designation of closed end cover:SCC212; L:175 mm; Designation of bearing:UC212G2L3; C0:32.8 kN; Designation of housing:F212N-; G:M6x1; A2:68.7 mm; e:29 mm; d:60 mm;
TOYOOKI HVP-VG1-G160A3-B HVP Vane pump	H:113 mm; Weight:0.45 kg; A:25.5 mm; S:7.5 mm; T min.:-20 °C; B1:30.9 mm; G:M6x1; d:20 mm; s1:24.2 mm; A1:11 mm;
TOYOOKI HVP-FC1-L17R-A HVP Vane pump	Dimension P:0.9 in; Dimension D:9.0 in; Maximum Speed:3310 rpm; Dimension B:6.0 in; Bearing Number:LSM75BR; Bearing - Housing - Seal:LSM75BRHATL; Cor - Static Load Rating:36194 lbf; Bearing - Housing - Seal UPC:013992042064; Tensioning Unit Type:Push Type; Note:This product line wa;
TOYOOKI HVP-VF1-L120A1-B HVP Vane pump	N:19mm; Designation of closed end cover:SCC212; L:175 mm; Designation of bearing:UC212G2L3; C0:32.8 kN; Designation of housing:F212N-; G:M6x1; A2:68.7 mm; e:29 mm; d:60 mm;