TOYOOKI HVP-FC1-F32R-A HVP Vane pump	Axial rigidity:291 N/µm; Characteristic outer ring frequency, BPF0:12.34 Hz; Radial rigidity:628 N/µm; Min operating temperature, Tmin:-30 °C; Dynamic load, C:63.5 kN; f0:16.74; Characteristic cage frequency, FTF:0.46 Hz; Fatigue limit load, Cu:3.5 kN; Characteristic inner ring frequency, BPFI:14.66 Hz; D1:150.65 mm;
TOYOOKI HVP-VCC1-L26-26A1A2-B HVP Vane pump	C0:7.88 kN; N2:32 mm; s1:30.9 mm; B:34.8 mm; C:14 kN; Designation of housing:T205-; B1:44.3 mm; Recommended tightening torque for set screw:3.7 Nm; T min.:-20 °C; L2:10 mm;
TOYOOKI HVP-FCE1-L5-60R-A HVP Vane pump	N:19mm; Designation of closed end cover:SCC212; L:175 mm; Designation of bearing:UC212G2L3; C0:32.8 kN; Designation of housing:F212N-; G:M6x1; A2:68.7 mm; e:29 mm; d:60 mm;
TOYOOKI HVP-FCC1-F36-39R-A HVP Vane pump	s1:39.7 mm; H2:107 mm; G:R1/8"; H:53.9 mm; N:M12; A:48 mm; B:42.8 mm; Weight:2.07 kg; L:120 mm; T max.:100 °C;
TOYOOKI HVP-FC2-F17R-A HVP Vane pump	Recommended tightening torque for set screw:33 Nm; G:M12x1,25; C:37 mm; S:24.5 mm; d1:120 mm; m:9.5 mm; C0:71.5 kN; SW:6 mm; d:90 mm; Weight:4.9 kg;
TOYOOKI HVP-VG1-G125A3-B HVP Vane pump	Dimension P:0.9 in; Dimension D:9.0 in; Maximum Speed:3310 rpm; Dimension B:6.0 in; Bearing Number:LSM75BR; Bearing - Housing - Seal:LSM75BRHATL; Cor - Static Load Rating:36194 lbf; Bearing - Housing - Seal UPC:013992042064; Tensioning Unit Type:Push Type; Note:This product line wa;
TOYOOKI HVP-FE1-L60R-A HVP Vane pump	Series:HH234000; C1 - Dynamic Radial Rating (1 million revolutions)5:274000 lbf; G2 - Heat Generation Factor (Rib-Roller End):62.1; Y - ISO Factor9:1.84; Cage Type:Pin-Type; a - Effective Center Location3:-26.4 mm; Cg - Geometry Factor:0.116; Db - Cup Backface Backing Diameter:276.10 mm; r - Cup Backface To Clear Radius2:6.86 mm; K - Factor7:1.79;
TOYOOKI HVP-VD1-F45A1-B HVP Vane pump	B:37.6 mm; d1:51.1 mm; J:110 mm; T min.:-40 °C; d:35 mm; L:135 mm; Designation of housing:FCE207-; e:1 mm; Weight:1.4 kg; B1:51.1 mm;