ALP2A-D-37 MARZOCCHI ALP Series Gear Pump	Weight:2.4 Kg; Thread G:M130x2; d1:115.00 mm; Appropriate Hydraulic Nut:HMV26; Locknut:KML26; Lockwasher and Lockplates:MBL26; L:65.00 mm; C:23 mm; D3:155 mm;
ALP2-D-16-VM-E3 MARZOCCHI ALP Series Gear Pump	Product Group:B04144; Category:Bearings; Mass (without HJ ring):0.37 kg; Characteristic outer ring frequency, BPF0:4.72 Hz; d1:44.9 mm; Brand:NTN; Dynamic load, C:53 kN; Fatigue limit load, Cu:6.1 kN; ra max:1 mm; Radial clearance class:CN;
ALPI4-300 MARZOCCHI ALP Series Gear Pump	H1:9 mm; C0:6.6 kN; Adapter sleeve reference:HLK2304; Designation of housing:PAE204N-; T min.:-20 °C; Dz:54 mm; d:20 mm; s1:16.5 mm; H:33.3 mm; E:10 mm;
ALP1A-D-7 MARZOCCHI ALP Series Gear Pump	Product Group:B04144; Category:Bearings; Mass (without HJ ring):0.37 kg; Characteristic outer ring frequency, BPF0:4.72 Hz; d1:44.9 mm; Brand:NTN; Dynamic load, C:53 kN; Fatigue limit load, Cu:6.1 kN; ra max:1 mm; Radial clearance class:CN;
ALP3A-D-30 MARZOCCHI ALP Series Gear Pump	Designation of housing:FEE210-; Weight:2.5 kg; N:14mm; T max.:100 °C; B:43.5 mm; G:R1/8"; H3:115; A:32.5 mm; e:12.5 mm; S:10.9 mm;
ALPA2-D-40 MARZOCCHI ALP Series Gear Pump	B:31 mm; L:60 mm; Weight:0.54 kg; Dz:54 mm; Designation of open end cover:SCO204-12; C:12.8 kN; T max.:100 °C; Recommended tightening torque for set screw:5.5 Nm; S:12.7 mm; e:15 mm;
ALPP3-D-33 MARZOCCHI ALP Series Gear Pump	da - Cone Frontface Backing Diameter:9.92 in; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:26200 lbf; K - Factor7:1.77; C1 - Dynamic Radial Rating (1 million revolutions)1:179000 lbf; db - Cone Backface Backing Diameter:9.92 in; d:8.875 in; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:312000 lbf; Cage Type:Stamped Steel; Ab - Cage-Cone Frontface Clearance:0.18 in; Cg - Geometry Factor8:0.136;
ALP2BK1-D-16 MARZOCCHI ALP Series Gear Pump	Types:7*** series; Number of Raceway Ring Rows:Double Row; Basic Dynamic Load Rating(N):219000; Size Standards:Metric System; Inner/Outer Ring Material:Steel; Combination symbol:DB; Retainer Type:Punching; d:80; Bearing Style:Open Type; Max. Allowed rpm(rpm):3100;