ALP2A-D-37-FG MARZOCCHI ALP Series Gear Pump | Bearing Part Number:6900; Type:Bearings with Housin; Width T(mm):40; Bearing Retained:Yes (with retaining; Number of Bearings:Double; Days to Ship:7 Days; Housing Material:1045 Carbon Steel; Seals:VV (Non-Contact Rubb; |
ALP2A-D-30 MARZOCCHI ALP Series Gear Pump | B:31 mm; L:60 mm; Weight:0.54 kg; Dz:54 mm; Designation of open end cover:SCO204-12; C:12.8 kN; T max.:100 °C; Recommended tightening torque for set screw:5.5 Nm; S:12.7 mm; e:15 mm; |
ALP4-D-250 MARZOCCHI ALP Series Gear Pump | Dz:60 mm; s1:16.7 mm; A2:32.7 mm; A:27 mm; e:16 mm; Designation of bearing:LK205G2H; Z:39.6 mm; B1:28 mm; A1:13 mm; Weight:0.6 kg; |
ALP2BK4-D-30 MARZOCCHI ALP Series Gear Pump | Weight:2.4 Kg; Thread G:M130x2; d1:115.00 mm; Appropriate Hydraulic Nut:HMV26; Locknut:KML26; Lockwasher and Lockplates:MBL26; L:65.00 mm; C:23 mm; D3:155 mm; |
ALP2A-D-25-FG MARZOCCHI ALP Series Gear Pump | B:31 mm; L:60 mm; Weight:0.54 kg; Dz:54 mm; Designation of open end cover:SCO204-12; C:12.8 kN; T max.:100 °C; Recommended tightening torque for set screw:5.5 Nm; S:12.7 mm; e:15 mm; |
ALP2-D-20-VM-E0 MARZOCCHI ALP Series Gear Pump | B:31 mm; L:60 mm; Weight:0.54 kg; Dz:54 mm; Designation of open end cover:SCO204-12; C:12.8 kN; T max.:100 °C; Recommended tightening torque for set screw:5.5 Nm; S:12.7 mm; e:15 mm; |
ALPP2-D-16 MARZOCCHI ALP Series Gear Pump | da - Cone Frontface Backing Diameter:9.92 in; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:26200 lbf; K - Factor7:1.77; C1 - Dynamic Radial Rating (1 million revolutions)1:179000 lbf; db - Cone Backface Backing Diameter:9.92 in; d:8.875 in; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:312000 lbf; Cage Type:Stamped Steel; Ab - Cage-Cone Frontface Clearance:0.18 in; Cg - Geometry Factor8:0.136; |
ALP1A-D-11 MARZOCCHI ALP Series Gear Pump | Types:7*** series; Number of Raceway Ring Rows:Double Row; Basic Dynamic Load Rating(N):219000; Size Standards:Metric System; Inner/Outer Ring Material:Steel; Combination symbol:DB; Retainer Type:Punching; d:80; Bearing Style:Open Type; Max. Allowed rpm(rpm):3100; |