Taiwan HGP-2A-F11R Hydromax HGP Gear Pump	D:52 mm; Outside Diameter:2.047 Inch | 52 Mill; Nlim (grease):13,000 rpm; Radial clearance class:C4; Fatigue limit load, Cu:0.36 kN; Inner Race Width:0 Inch | 0 Millimete; Weight / LBS:0.282; Brand:NTN; Bore:0.984 Inch | 25 Mill; B:15 mm;
Taiwan HGP-2A-L2L Hydromax HGP Gear Pump	Dz:54 mm; Designation of bearing:US204G2T20; Recommended tightening torque for set screw:5.5 Nm; T min.:-20 °C; S:7 mm; N:12mm; L:60 mm; e:15 mm; H:113 mm; C:12.8 kN;
Taiwan HGP-3A-F6R Hydromax HGP Gear Pump	Series:LM29700; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:1910 lbf; Cone Part Number:LM29749N; B - Cone Width:18.288 mm; Design Units:Imperial; a - Effective Center Location3:-4.3 mm; C1 - Dynamic Radial Rating (1 million revolutions)5:12900 lbf; r - Cup Backface To Clear Radius2:1.27 mm; G1 - Heat Generation Factor (Roller-Raceway):20.4; Cg - Geometry Factor:0.0666;
Taiwan HGP-2A-L11R Hydromax HGP Gear Pump	Series:LM29700; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:1910 lbf; Cone Part Number:LM29749N; B - Cone Width:18.288 mm; Design Units:Imperial; a - Effective Center Location3:-4.3 mm; C1 - Dynamic Radial Rating (1 million revolutions)5:12900 lbf; r - Cup Backface To Clear Radius2:1.27 mm; G1 - Heat Generation Factor (Roller-Raceway):20.4; Cg - Geometry Factor:0.0666;
Taiwan HGP-33A-L1414L Hydromax HGP Gear Pump	C0:11.5 kN; C:15.3 kN; B1:35.7 mm; N2:37 mm; d:30.16 mm; H2:56 mm; L2:10 mm; L:113 mm; S:8 mm; A2:28 mm;
Taiwan HGP-2A-L6L Hydromax HGP Gear Pump	rs min:3 mm; Characteristic rolling element frequency, BSF:5.1 Hz; Nlim:3,300 rpm; Characteristic outer ring frequency, BPF0:6.11 Hz; k:6 mm; Mass:9.61 kg; Number of lubrication holes:3; Y2:3.11; Associated sleeve reference:H2319; Characteristic cage frequency, FTF:0.41 Hz;
Taiwan HGP-3A-L4R Hydromax HGP Gear Pump	Type:Bearings with Housin; Number of Bearings:Single; Flange O.D. H(φ):114; Bearing Retained:No; Bearing I.D. d(mm):40; Bearing Part Number:6008; Width T(mm):17; Volume Discount:Available; Holder Surface Treatment:Black Oxide Coating;
Taiwan HGP-3A-F8R Hydromax HGP Gear Pump	D:52 mm; Outside Diameter:2.047 Inch | 52 Mill; Nlim (grease):13,000 rpm; Radial clearance class:C4; Fatigue limit load, Cu:0.36 kN; Inner Race Width:0 Inch | 0 Millimete; Weight / LBS:0.282; Brand:NTN; Bore:0.984 Inch | 25 Mill; B:15 mm;