50F-09-LLR-V1-19-02 TAIWAN KCL Vane pump 50F Series | Max operating temperature, Tmax:120 °C; Characteristic outer ring frequency, BPF0:4.58 Hz; da max:38.2 mm; Fatigue limit load, Cu:0.38 kN; da min:35 mm; Radial clearance class:CN; D:55 mm; Dynamic load, C:13 kN; D1:49.5 mm; ra max:1 mm; |
50F-26-FRL-V1-17-02 TAIWAN KCL Vane pump 50F Series | Bearing Used:Deep Groove Ball Bea; Shape:Flanged Pilot Type; Number of Bearings:Double; Housing Material:304 Stainless Steel; Bearing I.D. d(mm):12; Width T(mm):40 ~ 70; RoHS:6; Flange Shape:Round Type; |
50F-19-F-RL-02 TAIWAN KCL Vane pump 50F Series | s1:39 mm; S:12 mm; G:M6x1; d:60 mm; T min.:-20 °C; B1:49.3 mm; L:140 mm; Designation of housing:FL212N-; A2:66.3 mm; Designation of open end cover:SCOE212-60; |
50F-12-FRL-V1-6-02 TAIWAN KCL Vane pump 50F Series | Max operating temperature, Tmax:120 °C; Characteristic outer ring frequency, BPF0:4.58 Hz; da max:38.2 mm; Fatigue limit load, Cu:0.38 kN; da min:35 mm; Radial clearance class:CN; D:55 mm; Dynamic load, C:13 kN; D1:49.5 mm; ra max:1 mm; |
50F-21-LRR-V1-8-02 TAIWAN KCL Vane pump 50F Series | B:21.4 mm; d:20 mm; Recommended tightening torque for set screw:5.5 Nm; T min.:-20 °C; r:0.6; C1:4 mm; S:7.5 mm; T max.:100 °C; D:47 mm; SW:3 mm; |
50F-21-LRL-V1-19-02 TAIWAN KCL Vane pump 50F Series | h1:230 mm; W2:107 mm; b:350 mm; m:460 mm; W:486.5 mm; B:88 mm; Cover bolts:M8x25; a:605 mm; W1:420 mm; h:112 mm; |
50F-30-FRL-V1-17-02 TAIWAN KCL Vane pump 50F Series | Series:HM237500; Ab - Cage-Cone Frontface Clearance:3 mm; D:289.974 mm; R - Cone Backface To Clear Radius1:3.300 mm; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:26600 lbf; r - Cup Backface To Clear Radius2:3.05 mm; Da - Cup Frontface Backing Diameter:272.00 mm; C - Cup Width:48.001 mm; C0 - Static Radial Rating:254000 lbf; C90 - Dynamic Radial Rating (90 million revolutions)4:48800 lbf; |
50F-14-FLR-V1-19-02 TAIWAN KCL Vane pump 50F Series | Holder Surface Treatment:Electroless Nickel P; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Width T(mm):10; Bearing I.D. d(mm):10; Shape:T-Shaped; RoHS:6; Bearing Retained:Yes (with retaining; Height Indication:Height Configurable; Number of Bearings:Single; |