| TAIWAN KCL Vane pump VQ425 Series VQ425-156-26-L-RAA | e - ISO Factor3:0.44; r - Cup Backface To Clear Radius1:4 mm; Da - Cup Frontface Backing Diameter:293.5 mm; D:310 mm; G1 - Heat Generation Factor (Roller-Raceway):858.1; Cup Part Number:Y32234M; Series:32234; Db - Cup Backface Backing Diameter:279 mm; Design Units:METRIC; K - Factor2:1.34; |
| TAIWAN KCL Vane pump VQ425 Series VQ425-136-52-L-RAA | S:19 mm; Recommended tightening torque for set screw:8 Nm; C:21 mm; B:49.2 mm; T max.:100 °C; Weight:0.68 kg; m:8 mm; C0:18.2 kN; G:5/16-24UNF; C1:6.3 mm; |
| TAIWAN KCL Vane pump VQ425 Series VQ425-200-38-L-LAA | Shape:Flanged Pilot Type; Type:Bearings with Housin; Housing Material:1045 Carbon Steel; Flange O.D. H(φ):59; Days to Ship:7 Days; RoHS:6; Flange Shape:Square Type; Bearing Part Number:6902; Bearing Used:Deep Groove Ball Bea; |
| TAIWAN KCL Vane pump VQ425 Series VQ425-156-43-L-LAA | Piston Area:40.8 in²; Piston Length of Travel:0.551 in; C:16.929 in; Major Diameter B:12.562 in; E1:12.677 in; D:2.0870 in; Threads No. per Inch:6; E:15.236 in; Assembly Weight:65.1 lb; A:0.3940 in; |
| TAIWAN KCL Vane pump VQ425 Series VQ425-237-18-L-LAA | L2:13 mm; H:102 mm; P:230 mm; N1:16 mm; s1:21.45 mm; SW:3.97 mm; H1:89 mm; Z:59.1 mm; N2:37 mm; L1:78 mm; |
| TAIWAN KCL Vane pump VQ425 Series VQ425-237-22-F-RAA | Da - Cup Frontface Backing Diameter:5.64 in; e - ISO Factor8:0.33; Cone Part Number:749; C90 - Dynamic Radial Rating (90 million revolutions)4:21900 lbf; Aa - Cage-Cone Backface Clearance:0.05 in; Design Units:Imperial; B - Cone Width:1.8375 in; G2 - Heat Generation Factor (Rib-Roller End):26.3; T - Bearing Width to Flange:0.6250 in; Cg - Geometry Factor11:0.0898; |
| TAIWAN KCL Vane pump VQ425 Series VQ425-216-52-L-RAA | S:19 mm; Recommended tightening torque for set screw:8 Nm; C:21 mm; B:49.2 mm; T max.:100 °C; Weight:0.68 kg; m:8 mm; C0:18.2 kN; G:5/16-24UNF; C1:6.3 mm; |
| TAIWAN KCL Vane pump VQ425 Series VQ425-156-52-L-LAA | B:34 mm; T max.:200 °C; Z:16 mm; H:70 mm; H1:15 mm; d:12 mm; Recommended tightening torque for set screw:5.5 Nm; T min.:-20 °C; S:17 mm; C0:6.65 kN; |