TAIWAN KCL Vane pump VQ425 Series VQ425-216-75-L-LAA	Da - Cup Frontface Backing Diameter:5.64 in; e - ISO Factor8:0.33; Cone Part Number:749; C90 - Dynamic Radial Rating (90 million revolutions)4:21900 lbf; Aa - Cage-Cone Backface Clearance:0.05 in; Design Units:Imperial; B - Cone Width:1.8375 in; G2 - Heat Generation Factor (Rib-Roller End):26.3; T - Bearing Width to Flange:0.6250 in; Cg - Geometry Factor11:0.0898;
TAIWAN KCL Vane pump VQ425 Series VQ425-136-18-F-RAA	Piston Area:40.8 in²; Piston Length of Travel:0.551 in; C:16.929 in; Major Diameter B:12.562 in; E1:12.677 in; D:2.0870 in; Threads No. per Inch:6; E:15.236 in; Assembly Weight:65.1 lb; A:0.3940 in;
TAIWAN KCL Vane pump VQ425 Series VQ425-216-22-L-LAA	Accessory:With steel plate cov; Unit, Type:Insert Bearing Unit; Fit:J7; Unit Body Material:Cast Iron; Machining:No; Grease Type:Standard Grease; Seal:Nitrile; Rolling Element Material:Bearing Steel; Basic Load Rating, Dynamic Rating(N):42400;
TAIWAN KCL Vane pump VQ425 Series VQ425-216-43-L-LAA	Shape:Flanged Pilot Type; Type:Bearings with Housin; Housing Material:1045 Carbon Steel; Flange O.D. H(φ):59; Days to Ship:7 Days; RoHS:6; Flange Shape:Square Type; Bearing Part Number:6902; Bearing Used:Deep Groove Ball Bea;
TAIWAN KCL Vane pump VQ425 Series VQ425-156-22-L-LAA	r - Cup Frontface To Clear Radius2:0.03 in; C - Double Cup Width:2.125 in; Cage Type:Stamped Steel; Y1 - ISO Factor9:2.01; d:2.1250 in; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:9370 lbf; B - Cone Width:1.1542 in; Design Units:Imperial; db - Cone Backface Backing Diameter:2.68 in; Cone Part Number:456;
TAIWAN KCL Vane pump VQ425 Series VQ425-216-65-F-RAA	S:19 mm; Recommended tightening torque for set screw:8 Nm; C:21 mm; B:49.2 mm; T max.:100 °C; Weight:0.68 kg; m:8 mm; C0:18.2 kN; G:5/16-24UNF; C1:6.3 mm;
TAIWAN KCL Vane pump VQ425 Series VQ425-216-38-L-RAA	L2:13 mm; H:102 mm; P:230 mm; N1:16 mm; s1:21.45 mm; SW:3.97 mm; H1:89 mm; Z:59.1 mm; N2:37 mm; L1:78 mm;
TAIWAN KCL Vane pump VQ425 Series VQ425-189-47-L-LAA	S:19 mm; Recommended tightening torque for set screw:8 Nm; C:21 mm; B:49.2 mm; T max.:100 °C; Weight:0.68 kg; m:8 mm; C0:18.2 kN; G:5/16-24UNF; C1:6.3 mm;