Italy CASAPPA Gear Pump PLP20-14D-82E2-..	T max.:100 °C; s1:32.55 mm; Weight:3.73 kg; A1:16 mm; Designation of bearing:UC212G2T04; J:202 mm; T min.:-40 °C; A:50.4 mm; G:R1/8"; H:238 mm;
Italy CASAPPA Gear Pump PLP10.8 D0-30S0-LOC/OB-V-EL-FS	Rolling Element Material:Steel; Case hardening (outer ring only):No; Raceway Ring Shape:Needle Roller; Series:Inch; B:19.050(3/4); Specifications:Open End; Outer ring oil hole:No; Size Standards:Inch Base; Inner/Outer Ring Material:Steel; D:47.625(1 7/8);
Italy CASAPPA Gear Pump PLP30-73D-83E3-..	D:540.000 mm; Cage Type:EMB; C1(2) - Dynamic Radial Rating (Two-Rows):3990000 N; UPC Code:087796188150; C0 - Static Radial Rating:5950000 N; Y2 - ISO Factor6:2.1; e - ISO Factor3:0.31; Superseded Part:23164KYMBW507C08; Y1 - ISO Factor5:3.19; Da - Outer Ring Backing Diameter:490.000 mm;
Italy CASAPPA Gear Pump PLP20.31,5DO-82E2-LEB/EA-N-EL	Maximum Capacity / Filling Slot:No; Characteristic cage frequency, FTF:0.37 Hz; Characteristic rolling element frequency, BSF:3.52 Hz; B:15 mm; Outer Race Width:0.591 Inch | 15 Mill; Long Description:20MM Bore; 52MM Outs; Inch - Metric:Metric; Outside Diameter:2.047 Inch | 52 Mill; Internal Special Features:No;
Italy CASAPPA Gear Pump PLP10.4DO-81E1-LBB/BA-N-EL FS	Rolling Element Material:Steel; Case hardening (outer ring only):No; Raceway Ring Shape:Needle Roller; Series:Inch; B:19.050(3/4); Specifications:Open End; Outer ring oil hole:No; Size Standards:Inch Base; Inner/Outer Ring Material:Steel; D:47.625(1 7/8);
Italy CASAPPA Gear Pump PLP10.10 S0-02S0-LOC/OB-N-EL	T max.:100 °C; G:M6x1; L:175 mm; T min.:-40 °C; A:48 mm; B:33.4 mm; Designation of housing:F212-; s1:39 mm; S:12 mm; A1:18 mm;
Italy CASAPPA Gear Pump PLP10.6,3 D0-86E7-LGD/GD-N-FS	Rolling Element Material:Steel; Case hardening (outer ring only):No; Raceway Ring Shape:Needle Roller; Series:Inch; B:19.050(3/4); Specifications:Open End; Outer ring oil hole:No; Size Standards:Inch Base; Inner/Outer Ring Material:Steel; D:47.625(1 7/8);
Italy CASAPPA Gear Pump RBP100	N:11,5mm; Dz:60 mm; s1:17 mm; Z:42.4 mm; C0:7.88 kN; A1:11 mm; T min.:-20 °C; Designation of bearing:UC205G2L4; Designation of open end cover:SCO205-25; Recommended tightening torque for set screw:5.5 Nm;