Italy CASAPPA Gear Pump PLP20.25DO-82E2-LEB/EA-N-EL | N:11,5mm; Dz:60 mm; s1:17 mm; Z:42.4 mm; C0:7.88 kN; A1:11 mm; T min.:-20 °C; Designation of bearing:UC205G2L4; Designation of open end cover:SCO205-25; Recommended tightening torque for set screw:5.5 Nm; |
Italy CASAPPA Gear Pump PLP10.1 D0-86E7-LGC/GC-N-EL-FS | Rolling Element Material:Steel; Case hardening (outer ring only):No; Raceway Ring Shape:Needle Roller; Series:Inch; B:19.050(3/4); Specifications:Open End; Outer ring oil hole:No; Size Standards:Inch Base; Inner/Outer Ring Material:Steel; D:47.625(1 7/8); |
Italy CASAPPA Gear Pump PLP20-20D-82E2-.. | Maximum Capacity / Filling Slot:No; Characteristic cage frequency, FTF:0.37 Hz; Characteristic rolling element frequency, BSF:3.52 Hz; B:15 mm; Outer Race Width:0.591 Inch | 15 Mill; Long Description:20MM Bore; 52MM Outs; Inch - Metric:Metric; Outside Diameter:2.047 Inch | 52 Mill; Internal Special Features:No; |
Italy CASAPPA Gear Pump PLP20-14D-82E2-.. | T max.:100 °C; s1:32.55 mm; Weight:3.73 kg; A1:16 mm; Designation of bearing:UC212G2T04; J:202 mm; T min.:-40 °C; A:50.4 mm; G:R1/8"; H:238 mm; |
Italy CASAPPA Gear Pump PLP10.3,15 D0-86E7-LBB/BA-N EL | Inner/Outer Ring Material:Steel; Bearing Style:Open Type; Days to Ship:9 Days or more; Specifications/Environment:Standard; Combination of Angular Contact Ball Bearings:Front Combination; Size Standards:Metric System; Outer Ring Shape:Flat; Rolling Element Material:Steel; |
Italy CASAPPA Gear Pump PLP10.10 D0-81**-LBB/BA-N-EL | Rolling Element Material:Steel; Case hardening (outer ring only):No; Raceway Ring Shape:Needle Roller; Series:Inch; B:19.050(3/4); Specifications:Open End; Outer ring oil hole:No; Size Standards:Inch Base; Inner/Outer Ring Material:Steel; D:47.625(1 7/8); |
Italy CASAPPA Gear Pump PLP20-9D-82E2-.. | Series Type:Light Series; Dimension H2:208 mm; Bearing Number:LSM70BR; Seal Type:Felt Type; Ca - Axial Load Rating:1708.53 lbf; Dimension H:95 mm; Cor - Static Load Rating:36194 lbf; Bolt Size:2 x M20; Cr - Dynamic Load Rating:31024 lbf; Support Type:Two-Bolt Plummer Blo; |
Italy CASAPPA Gear Pump PLP10.5,8 D0-86E7-LBB/BA-N-EL-FS | B:49.2 mm; A:36 mm; Designation of closed end cover:SCC208; S:19 mm; T max.:100 °C; d:38.1 mm; C:29.6 kN; N:14mm; s1:24.6 mm; Designation of housing:FC208N-; |