Italy CASAPPA Gear Pump HDD30.82	T max.:100 °C; s1:32.55 mm; Weight:3.73 kg; A1:16 mm; Designation of bearing:UC212G2T04; J:202 mm; T min.:-40 °C; A:50.4 mm; G:R1/8"; H:238 mm;
Italy CASAPPA Gear Pump PLP10.10 D0-30S0-LOC/OB-N-EL-FS	J:143.5 mm; s1:24.6 mm; A:36 mm; S:19 mm; G:R1/8"; C:29.6 kN; A4:32 mm; L:105 mm; N:14mm; H:172 mm;
Italy CASAPPA Gear Pump PLP10.10 S0-30S0-LOC/OB-N-EL-FS	Rolling Element Material:Steel; Case hardening (outer ring only):No; Raceway Ring Shape:Needle Roller; Series:Inch; B:19.050(3/4); Specifications:Open End; Outer ring oil hole:No; Size Standards:Inch Base; Inner/Outer Ring Material:Steel; D:47.625(1 7/8);
Italy CASAPPA Gear Pump RBS80	D:540.000 mm; Cage Type:EMB; C1(2) - Dynamic Radial Rating (Two-Rows):3990000 N; UPC Code:087796188150; C0 - Static Radial Rating:5950000 N; Y2 - ISO Factor6:2.1; e - ISO Factor3:0.31; Superseded Part:23164KYMBW507C08; Y1 - ISO Factor5:3.19; Da - Outer Ring Backing Diameter:490.000 mm;
Italy CASAPPA Gear Pump PLP10.3,15 S0-81**-LBB/BA-N-EL FS	T max.:100 °C; G:M6x1; L:175 mm; T min.:-40 °C; A:48 mm; B:33.4 mm; Designation of housing:F212-; s1:39 mm; S:12 mm; A1:18 mm;
Italy CASAPPA Gear Pump RBP50	N:11,5mm; Dz:60 mm; s1:17 mm; Z:42.4 mm; C0:7.88 kN; A1:11 mm; T min.:-20 °C; Designation of bearing:UC205G2L4; Designation of open end cover:SCO205-25; Recommended tightening torque for set screw:5.5 Nm;
Italy CASAPPA Gear Pump PLP10.3,15S0-30S0-LGC/GC-N-EL	Number of Bearings:Single; Bearing Used:Deep Groove Ball Bea; Shape:Bottom Mount; Seals:DD (Contact Rubber S; Width T(mm):13; Bearing Part Number:6903; Bearing I.D. d(mm):17; Bearing Retained:Yes (with retaining;
Italy CASAPPA Gear Pump PLP10.5 D0-86E7-LBB/BA-N-EL FS	Inner/Outer Ring Material:Steel; Bearing Style:Open Type; Days to Ship:9 Days or more; Specifications/Environment:Standard; Combination of Angular Contact Ball Bearings:Front Combination; Size Standards:Metric System; Outer Ring Shape:Flat; Rolling Element Material:Steel;