TAIWAN VQ15-31-L-RRL-01 KCL Vane pump VQ15 Series	Housing Material:1045 Carbon Steel; Bearing I.D. d(mm):20; Type:Bearings with Housin; Bearing Retained:Yes (with retaining; Seals:ZZ (Double Shield); Shape:T-Shaped; Bearing Material:[Steel] Steel; Lateral Width L(mm):73; Bearing Used:Deep Groove Ball Bea;
TAIWAN VQ15-17-F-RRB-01 KCL Vane pump VQ15 Series	L1:17.5 mm; Recommended tightening torque for set screw:5.5 Nm; G:M6x1; T max.:100 °C; A1:18 mm; Designation of closed end cover:SCCE203; d1:27.2 mm; N:M8; A:30 mm; S:6.5 mm;
TAIWAN VQ15-23-L-RAB-01 KCL Vane pump VQ15 Series	E:95 mm; Weight / Kilogram:1.188; ra max:2 mm; r1s min:2 mm; D:110 mm; Max operating temperature, Tmax:120 °C; Min operating temperature, Tmin:-40 °C; d:50 mm; Nlim (oil):7,700 rpm; Static load, C0:86 kN;
TAIWAN VQ15-38-L-RAB-01 KCL Vane pump VQ15 Series	Shape:Flanged Pilot Type; Bearing Retained:No; Flange Shape:Round Type; Flange O.D. H(φ):50; Holder Surface Treatment:Clear Anodize; Housing Material:[Aluminum Alloy] 201; Bearing Part Number:6901; Number of Bearings:Double;
TAIWAN VQ15-11-F-RRA-01 KCL Vane pump VQ15 Series	Raceway Ring Shape:Cylindrical Roller; Rolling Element Material:Steel; High-Speed Steel:Standard; Large-capacity type:E (Large-capacity ty; Load Direction:Radial; Inner/Outer Ring Material:Steel; Revolution Frequency(rpm):7200; Specifications/Environment:Standard; Internal Clearance Symbol:C3 (Greater than nor; B:31;
TAIWAN VQ15-14-L-LRA-01 KCL Vane pump VQ15 Series	Housing Material:1045 Carbon Steel; Bearing I.D. d(mm):20; Type:Bearings with Housin; Bearing Retained:Yes (with retaining; Seals:ZZ (Double Shield); Shape:T-Shaped; Bearing Material:[Steel] Steel; Lateral Width L(mm):73; Bearing Used:Deep Groove Ball Bea;
TAIWAN VQ15-17-L-LRL-01 KCL Vane pump VQ15 Series	Outer Race Width:0.63 Inch | 16 Milli; Category:Single Row Ball Bear; ra max:1 mm; Brand:NTN; Enclosure Type:Non-Contact Seal; B:16 mm; Static load, C0:11.3 kN; Enclosure:2 Seals;
TAIWAN VQ15-31-F-LBB-01 KCL Vane pump VQ15 Series	H:57.2 mm; T min.:-20 °C; C:35.1 kN; A1:34 mm; d:49.21 mm; H1:15 mm; Recommended tightening torque for set screw:16.8 Nm; B:51.6 mm; Designation of housing:PAE210-; L1:33.5 mm;