TAIWAN VQ15-38-L-RBB-01 KCL Vane pump VQ15 Series	Bearing Part Number:608; Bearing I.D. d(mm):8; Bearing Retained:Yes (with retaining; Bearing Used:Deep Groove Ball Bea; Width T(mm):25 ～ 50; RoHS:6; Holder Surface Treatment:Clear Anodize; Number of Bearings:Double; Type:Bearings with Housin;
TAIWAN VQ15-26-L-RRL-01 KCL Vane pump VQ15 Series	Outer Race Width:0.63 Inch | 16 Milli; Category:Single Row Ball Bear; ra max:1 mm; Brand:NTN; Enclosure Type:Non-Contact Seal; B:16 mm; Static load, C0:11.3 kN; Enclosure:2 Seals;
TAIWAN VQ15-26-F-LRL-01 KCL Vane pump VQ15 Series	L1:17.5 mm; Recommended tightening torque for set screw:5.5 Nm; G:M6x1; T max.:100 °C; A1:18 mm; Designation of closed end cover:SCCE203; d1:27.2 mm; N:M8; A:30 mm; S:6.5 mm;
TAIWAN VQ15-6-F-RBA-01 KCL Vane pump VQ15 Series	Surface Treatment:No; Unit, Type:Insert Bearing Unit; Fit:J7; Grease Type:Standard Grease; Basic Load Rating, Static Rating(N):24000; Bearing Unit, Type:[Others] Cartridge t; Diameter series symbol:For Heavy Load; Rolling Element Material:Bearing Steel; Basic Load Rating, Dynamic Rating(N):40700;
TAIWAN VQ15-19-L-RBA-01 KCL Vane pump VQ15 Series	E:95 mm; Weight / Kilogram:1.188; ra max:2 mm; r1s min:2 mm; D:110 mm; Max operating temperature, Tmax:120 °C; Min operating temperature, Tmin:-40 °C; d:50 mm; Nlim (oil):7,700 rpm; Static load, C0:86 kN;
TAIWAN VQ15-11-F-RAB-01 KCL Vane pump VQ15 Series	Flange Shape:Compact Type; Number of Bearings:Double; Width T(mm):30 ～ 70; Shape:Flanged Pilot Type; Bearing Used:Deep Groove Ball Bea; RoHS:6; Bearing I.D. d(mm):15; Bearing Retained:Yes (with retaining; Bearing Material:Stainless Steel;
TAIWAN VQ15-31-F-RRL-01 KCL Vane pump VQ15 Series	Surface Treatment:No; Unit, Type:Insert Bearing Unit; Fit:J7; Grease Type:Standard Grease; Basic Load Rating, Static Rating(N):24000; Bearing Unit, Type:[Others] Cartridge t; Diameter series symbol:For Heavy Load; Rolling Element Material:Bearing Steel; Basic Load Rating, Dynamic Rating(N):40700;
TAIWAN VQ15-14-F-RBA-01 KCL Vane pump VQ15 Series	A2:58.4 mm; Recommended tightening torque for set screw:18.7 Nm; e:25 mm; C0:25.5 kN; A1:20 mm; J:130 mm; Weight:4.31 kg; A:44 mm; Designation of bearing:SUC211-32; Designation of closed end cover:SCC211;