Taiwan VCM-SF-20D-10 CML VCM Sereies Vane Pump	C0:29.2 kN; s1:48.4 mm; T min.:-40 °C; d1:74.5 mm; Weight:4.19 kg; C:43.55 kN; Recommended tightening torque for set screw:22 Nm; H3:125; A4:30 mm; Designation of housing:FC211-;
Taiwan VCM-DFOC-40C-1 CML VCM Sereies Vane Pump	Center of Bearing from Housing End A2:0.778 mm; Flange Thickness A1:11.1 mm; Bolt Hole Size N:11.5 mm; Weight:1.731 lb; Seal Type:Labyrinth Seal; Bolt Hole Spacing J:99.2 mm; Inside Ring Width B:0 mm; Series:Industrial; Dynamic Load Rating:3490 lbf; Shaft Size d:15/16 in;
Taiwan VCM-SM-30-D-20 CML VCM Sereies Vane Pump	S:12.7 mm; d:12 mm; T min.:-20 °C; A:29.5 mm; Weight:0.74 kg; Designation of housing:FE204N-; A2:37.3 mm; Designation of bearing:UC201G2T20; e:19 mm; T max.:200 °C;
Taiwan VCM-SFII-20D-10 CML VCM Sereies Vane Pump	Center of Bearing from Housing End A2:0.778 mm; Flange Thickness A1:11.1 mm; Bolt Hole Size N:11.5 mm; Weight:1.731 lb; Seal Type:Labyrinth Seal; Bolt Hole Spacing J:99.2 mm; Inside Ring Width B:0 mm; Series:Industrial; Dynamic Load Rating:3490 lbf; Shaft Size d:15/16 in;
Taiwan VCM-SF-40C-20 CML VCM Sereies Vane Pump	T min.:-40 °C; C:14 kN; L:140 mm; d:25.4 mm; Weight:1.23 kg; A1:24 mm; J:105 mm; A:50 mm; s1:13.5 mm; Designation of open end cover:SCOU205-16;
Taiwan VCM-DF-40A/40A-10 CML VCM Sereies Vane Pump	C0:32.8 kN; s1:32.55 mm; N:18mm; A:50.4 mm; S:25.4 mm; Designation of housing:FLE212N-; H:238 mm; Designation of open end cover:SCO212-60; C:52.5 kN; T min.:-20 °C;
Taiwan VCM-SF-30C-10 CML VCM Sereies Vane Pump	T min.:-20 °C; d:15.88 mm; L:70 mm; B:22 mm; J:48 mm; T max.:100 °C; C:9.55 kN; G:M6x1; H:30.2 mm; N:M8;
Taiwan VCM-DF-30C/30C-10 CML VCM Sereies Vane Pump	G1 - Heat Generation Factor (Roller-Raceway)11:48.7; Design Units:Imperial; e - ISO Factor8:0.88; db - Cone Backface Backing Diameter:2.8 in; Bearing Weight:6.27 lb; C - Double Cup Width:1.7500 in; K - Factor7:0.66; Cg - Geometry Factor12:0.12; R - Cone Backface To Clear Radius1:0.14 in; B - Cone Width:1.0594 in;