VQ20-19-L-LRL-01 TAIWAN KCL Vane pump VQ20 Series | r - Cup Frontface To Clear Radius2:0.03 in; K - Factor7:1.37; C - Double Cup Width:1.7500 in; B - Cone Width:1.0000 in; Cage Type:Stamped Steel; Series:28900; Bearing Weight:3.57 lb; D:3.9370 in; R - Cone Backface To Clear Radius1:0.14 in; Design Units:Imperial; |
VQ20-17-F-LAL-01 TAIWAN KCL Vane pump VQ20 Series | r - Cup Frontface To Clear Radius2:0.03 in; K - Factor7:1.37; C - Double Cup Width:1.7500 in; B - Cone Width:1.0000 in; Cage Type:Stamped Steel; Series:28900; Bearing Weight:3.57 lb; D:3.9370 in; R - Cone Backface To Clear Radius1:0.14 in; Design Units:Imperial; |
VQ20-17-F-RBA-01 TAIWAN KCL Vane pump VQ20 Series | Bearing Used:Deep Groove Ball Bea; Days to Ship:7 Days; Type:Bearings with Housin; Bearing I.D. d(mm):20; Bearing Material:[Steel] Steel; Bearing Retained:No; Width T(mm):30 ~ 70; Shape:Flanged Pilot Type; Holder Surface Treatment:Clear Anodize; |
VQ20-8-F-RAB-01 TAIWAN KCL Vane pump VQ20 Series | b:13.2 mm; d2:151.4 mm; d:130 mm; Min operating temperature, Tmin:-40 °C; Number of lubrication holes:3; B:64 mm; Mass:10.77 kg; Characteristic outer ring frequency, BPF0:7.61 Hz; Y0:2.63; Nref:2,800 rpm; |
VQ20-8-L-LBB-01 TAIWAN KCL Vane pump VQ20 Series | Shaft Size d:2 1/4 in; Series:Industrial; Angle between Set Screws:90 º; Center of Bearing from End S:31 mm; Bearing Type:Ball Bearing; Inner Ring Width B:61.91 mm; Lubrication Type:Non-Relubricatable; Material:Bearing Steel; Static Load Rating:8080 lbf; Bore Type:Cylindrical bore; |
VQ20-11-L-RBR-01 TAIWAN KCL Vane pump VQ20 Series | Static load, C0:36 kN; Brand:SNR; Da max:102 mm; da min:68 mm; ra max:1.5 mm; d1:73.4 mm; B:22 mm; Nlim:3,900 rpm; Characteristic inner ring frequency, BPFI:5.93 Hz; Fatigue limit load, Cu:1.64 kN; |
VQ20-14-F-RBL-01 TAIWAN KCL Vane pump VQ20 Series | Bearing Part Number:6901; Holder Surface Treatment:Electroless Nickel P; Number of Bearings:Single; Housing Material:1045 Carbon Steel; RoHS:6; Bearing Retained:Yes (with retaining; Bearing Used:Deep Groove Ball Bea; Seals:DD (Contact Rubber S; Shape:Front Mount; |
VQ20-19-L-LAR-01 TAIWAN KCL Vane pump VQ20 Series | Shaft Size d:2 1/4 in; Series:Industrial; Angle between Set Screws:90 º; Center of Bearing from End S:31 mm; Bearing Type:Ball Bearing; Inner Ring Width B:61.91 mm; Lubrication Type:Non-Relubricatable; Material:Bearing Steel; Static Load Rating:8080 lbf; Bore Type:Cylindrical bore; |