50T-26-FLL-V1-23-01 TAIWAN KCL Vane pump 50T Series	Unit Body Material:Shaped steel/Groove-; Surface Treatment:No; Unit, Type:Bearing Unit with Fr; Diameter series symbol:For Heavy Load; Machining:No; Rolling Element Material:Bearing Steel; Grease Type:SH33M; Stroke:500;
50T-26-FLR-V1-19-01 TAIWAN KCL Vane pump 50T Series	Bearing Material:[Steel] Steel; Bearing Used:Deep Groove Ball Bea; Housing Material:304 Stainless Steel; Bearing I.D. d(mm):17; Bearing Part Number:6903; Volume Discount:Available; Number of Bearings:Double; Holder Surface Treatment:Not Provided; Bearing Retained:Yes (with retaining;
50T-17-LRL-V1-17-01 TAIWAN KCL Vane pump 50T Series	C0:7.88 kN; T max.:100 °C; S:7.5 mm; J:99 mm; Recommended tightening torque for set screw:3.7 Nm; H:130 mm; N:16mm; Z:24.2 mm; d:22.22 mm; Weight:0.58 kg;
50T-30-LLL-V1-8-02 TAIWAN KCL Vane pump 50T Series	Designation of housing:FS312-; S:26 mm; e:19 mm; A1:22 mm; L:195 mm; J:150 mm; N:23mm; B:71 mm; A2:64 mm; C:81.6 kN;
50T-17-L-RL-01 TAIWAN KCL Vane pump 50T Series	Pre Install Clearance Min:0.0030 in; e - Geometry Factor:0.24; Dimension SVV:4.02 in; Oil Lubrication - M/N Seal:2000 rpm; Housing Style:Two-Bolt Pillow Bloc; Shaft Size  :2-3/16 in; Dimension D Min:6.50 in; Dimension B:5.25 in; Dimension G:2.630 in; Y1 - Geometry Factor:2.84;
50T-40-FRL-V1-31-01 TAIWAN KCL Vane pump 50T Series	Lateral Width L(mm):56; Seals:VV (Non-Contact Rubb; Bearing I.D. d(mm):12; Shape:Block; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Bearing Material:[Steel] Steel; Days to Ship:8 Days; Bearing Retained:Yes (with retaining;
50T-30-LLR-V1-11-02 TAIWAN KCL Vane pump 50T Series	Locking Style:Single V-Lock; Grease Lubrication - T Seal:1600 rpm; Grease Lubrication - B/C/O Seal:900 rpm; Dimension H:1.53 in; Dimension G:3.420 in; Eng Internal Radial Clearance - Min:0.0043; Float:0.083 in; Bearing Number:22220; Pre Install Clearance Max:0.0055 in; Y2 - Geometry Factor:4.24;
50T-40-L-RL-01 TAIWAN KCL Vane pump 50T Series	L:195 mm; A:30.5 mm; C0:32.8 kN; e:1 mm; H3:135; A1:16 mm; Recommended tightening torque for set screw:22 Nm; T max.:200 °C; B:65.1 mm; C:52.5 kN;